mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Komal Bajaj <quic_kbajaj@quicinc.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 devicetree@vger.kernel.org,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	 Bjorn Andersson <andersson@kernel.org>,
	linux-kernel@vger.kernel.org,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 0/3] Add devicetree support of USB for QDU/QRU1000
Date: Wed, 20 Mar 2024 11:20:55 -0500	[thread overview]
Message-ID: <171095148554.1943200.12080115651498296993.robh@kernel.org> (raw)
In-Reply-To: <20240319091020.15137-1-quic_kbajaj@quicinc.com>


On Tue, 19 Mar 2024 14:40:17 +0530, Komal Bajaj wrote:
> This series adds devicetree nodes to support interconnects and usb for qdu/qru1000.
> This is based on previously sent driver series[1].
> [1]
> https://lore.kernel.org/linux-arm-msm/20240319090729.14674-1-quic_kbajaj@quicinc.com/
> 
> ------
> Changes in v2:
> * Changes qmpphy node name
> * Changes dr_mode to otg and added USB-B port USB role switch
> * Dropped maximum-speed property from usb dwc3 node
> * Link to v1: https://lore.kernel.org/linux-arm-msm/20240311120859.18489-1-quic_kbajaj@quicinc.com/
> 
> Komal Bajaj (3):
>   arm64: dts: qcom: qdu1000: Add USB3 and PHY support
>   arm64: dts: qcom: qdu1000-idp: enable USB nodes
>   arm64: dts: qcom: qru1000-idp: enable USB nodes
> 
>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts |  65 +++++++++++
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi    | 133 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000-idp.dts |  65 +++++++++++
>  3 files changed, 263 insertions(+)
> 
> --
> 2.42.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/qdu1000-idp.dtb qcom/qru1000-idp.dtb' for 20240319091020.15137-1-quic_kbajaj@quicinc.com:

arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: /: usb-conn-gpio: {'compatible': ['gpio-usb-b-connector'], 'vbus-gpio': [[90, 7, 0]], 'id-gpio': [[91, 42, 0]], 'vbus-supply': [[99]], 'pinctrl-0': [[100, 101]], 'pinctrl-names': ['default'], 'port': {'endpoint': {'remote-endpoint': [[102]], 'phandle': [[88]]}}} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: /: usb-conn-gpio: {'compatible': ['gpio-usb-b-connector'], 'vbus-gpio': [[86, 7, 0]], 'id-gpio': [[87, 42, 0]], 'vbus-supply': [[95]], 'pinctrl-0': [[96, 97]], 'pinctrl-names': ['default'], 'port': {'endpoint': {'remote-endpoint': [[98]], 'phandle': [[84]]}}} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: phy@88e3000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,qdu1000-usb-hs-phy', 'qcom,usb-snps-hs-7nm-phy'] is too long
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sc8180x-usb-hs-phy', 'qcom,usb-snps-femto-v2-phy']
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sa8775p-usb-hs-phy', 'qcom,sc8280xp-usb-hs-phy']
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sc7280-usb-hs-phy', 'qcom,sdx55-usb-hs-phy', 'qcom,sdx65-usb-hs-phy', 'qcom,sm6375-usb-hs-phy', 'qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
	'qcom,usb-snps-hs-5nm-phy' was expected
	from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: /soc@0/phy@88e3000: failed to match any schema with compatible: ['qcom,qdu1000-usb-hs-phy', 'qcom,usb-snps-hs-7nm-phy']
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: phy@88e3000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,qdu1000-usb-hs-phy', 'qcom,usb-snps-hs-7nm-phy'] is too long
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sc8180x-usb-hs-phy', 'qcom,usb-snps-femto-v2-phy']
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sa8775p-usb-hs-phy', 'qcom,sc8280xp-usb-hs-phy']
	'qcom,qdu1000-usb-hs-phy' is not one of ['qcom,sc7280-usb-hs-phy', 'qcom,sdx55-usb-hs-phy', 'qcom,sdx65-usb-hs-phy', 'qcom,sm6375-usb-hs-phy', 'qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
	'qcom,usb-snps-hs-5nm-phy' was expected
	from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: /soc@0/phy@88e3000: failed to match any schema with compatible: ['qcom,qdu1000-usb-hs-phy', 'qcom,usb-snps-hs-7nm-phy']
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: /soc@0/phy@88e5000: failed to match any schema with compatible: ['qcom,qdu1000-qmp-usb3-uni-phy']
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: usb@a6f8800: compatible:0: 'qcom,qdu1000-dwc3' is not one of ['qcom,ipq4019-dwc3', 'qcom,ipq5018-dwc3', 'qcom,ipq5332-dwc3', 'qcom,ipq6018-dwc3', 'qcom,ipq8064-dwc3', 'qcom,ipq8074-dwc3', 'qcom,ipq9574-dwc3', 'qcom,msm8953-dwc3', 'qcom,msm8994-dwc3', 'qcom,msm8996-dwc3', 'qcom,msm8998-dwc3', 'qcom,qcm2290-dwc3', 'qcom,qcs404-dwc3', 'qcom,sa8775p-dwc3', 'qcom,sc7180-dwc3', 'qcom,sc7280-dwc3', 'qcom,sc8280xp-dwc3', 'qcom,sdm660-dwc3', 'qcom,sdm670-dwc3', 'qcom,sdm845-dwc3', 'qcom,sdx55-dwc3', 'qcom,sdx65-dwc3', 'qcom,sdx75-dwc3', 'qcom,sm4250-dwc3', 'qcom,sm6115-dwc3', 'qcom,sm6125-dwc3', 'qcom,sm6350-dwc3', 'qcom,sm6375-dwc3', 'qcom,sm8150-dwc3', 'qcom,sm8250-dwc3', 'qcom,sm8350-dwc3', 'qcom,sm8450-dwc3', 'qcom,sm8550-dwc3', 'qcom,sm8650-dwc3', 'qcom,x1e80100-dwc3']
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: /soc@0/phy@88e5000: failed to match any schema with compatible: ['qcom,qdu1000-qmp-usb3-uni-phy']
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: usb@a6f8800: compatible:0: 'qcom,qdu1000-dwc3' is not one of ['qcom,ipq4019-dwc3', 'qcom,ipq5018-dwc3', 'qcom,ipq5332-dwc3', 'qcom,ipq6018-dwc3', 'qcom,ipq8064-dwc3', 'qcom,ipq8074-dwc3', 'qcom,ipq9574-dwc3', 'qcom,msm8953-dwc3', 'qcom,msm8994-dwc3', 'qcom,msm8996-dwc3', 'qcom,msm8998-dwc3', 'qcom,qcm2290-dwc3', 'qcom,qcs404-dwc3', 'qcom,sa8775p-dwc3', 'qcom,sc7180-dwc3', 'qcom,sc7280-dwc3', 'qcom,sc8280xp-dwc3', 'qcom,sdm660-dwc3', 'qcom,sdm670-dwc3', 'qcom,sdm845-dwc3', 'qcom,sdx55-dwc3', 'qcom,sdx65-dwc3', 'qcom,sdx75-dwc3', 'qcom,sm4250-dwc3', 'qcom,sm6115-dwc3', 'qcom,sm6125-dwc3', 'qcom,sm6350-dwc3', 'qcom,sm6375-dwc3', 'qcom,sm8150-dwc3', 'qcom,sm8250-dwc3', 'qcom,sm8350-dwc3', 'qcom,sm8450-dwc3', 'qcom,sm8550-dwc3', 'qcom,sm8650-dwc3', 'qcom,x1e80100-dwc3']
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: /soc@0/usb@a6f8800: failed to match any schema with compatible: ['qcom,qdu1000-dwc3', 'qcom,dwc3']
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: /soc@0/usb@a6f8800: failed to match any schema with compatible: ['qcom,qdu1000-dwc3', 'qcom,dwc3']
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: pmic@0: gpio@c000: 'usb-vbus-det-default' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: pmic@0: gpio@c000: 'usb-vbus-det-default' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: gpio@c000: 'usb-vbus-det-default' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: gpio@c000: 'usb-vbus-det-default' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: pinctrl@f000000: Unevaluated properties are not allowed ('usb-id-det-default', 'usb-vbus-boost-default' were unexpected)
	from schema $id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: pinctrl@f000000: Unevaluated properties are not allowed ('usb-id-det-default', 'usb-vbus-boost-default' were unexpected)
	from schema $id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: usb-conn-gpio: compatible: 'oneOf' conditional failed, one must be fixed:
	['gpio-usb-b-connector'] is too short
	'gpio-usb-b-connector' is not one of ['usb-a-connector', 'usb-b-connector', 'usb-c-connector']
	'samsung,usb-connector-11pin' was expected
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: usb-conn-gpio: 'anyOf' conditional failed, one must be fixed:
	'vbus-gpios' is a required property
	'id-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
arch/arm64/boot/dts/qcom/qru1000-idp.dtb: usb-conn-gpio: Unevaluated properties are not allowed ('compatible', 'id-gpio', 'vbus-gpio' were unexpected)
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: usb-conn-gpio: compatible: 'oneOf' conditional failed, one must be fixed:
	['gpio-usb-b-connector'] is too short
	'gpio-usb-b-connector' is not one of ['usb-a-connector', 'usb-b-connector', 'usb-c-connector']
	'samsung,usb-connector-11pin' was expected
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: usb-conn-gpio: 'anyOf' conditional failed, one must be fixed:
	'vbus-gpios' is a required property
	'id-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
arch/arm64/boot/dts/qcom/qdu1000-idp.dtb: usb-conn-gpio: Unevaluated properties are not allowed ('compatible', 'id-gpio', 'vbus-gpio' were unexpected)
	from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml#






  parent reply	other threads:[~2024-03-20 16:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-19  9:10 Komal Bajaj
2024-03-19  9:10 ` [PATCH 1/3] arm64: dts: qcom: qdu1000: Add USB3 and PHY support Komal Bajaj
2024-03-19  9:10 ` [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes Komal Bajaj
2024-03-19  9:52   ` Dmitry Baryshkov
2024-04-01 22:55     ` Bjorn Andersson
2024-04-03  7:50       ` Krishna Kurapati PSSNV
2024-04-03 15:52         ` Dmitry Baryshkov
2024-03-19  9:10 ` [PATCH 3/3] arm64: dts: qcom: qru1000-idp: " Komal Bajaj
2024-03-19  9:37 ` [PATCH 0/3] Add devicetree support of USB for QDU/QRU1000 Dmitry Baryshkov
2024-03-20 16:20 ` Rob Herring [this message]
  -- strict thread matches above, loose matches on Subject: below --
2024-03-11 12:08 Komal Bajaj
2024-03-11 14:23 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=171095148554.1943200.12080115651498296993.robh@kernel.org \
    --to=robh@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_kbajaj@quicinc.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®