Re: [PATCH v2 2/7] dt-bindings: i2c: mux: mule: add dt-bindings for mule i2c multiplexer

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 06 May 2024 13:37:53 +0200, Farouk Bouabid wrote:
> Mule is an MCU that emulates a set of i2c devices which are reachable
> through an i2c-mux.
> 
> The emulated devices share a single i2c address with the mux core itself
> where the requested register is what determines which logic is executed
> (mux logic or device logic).
> 
> Add support for the Mule I2C multiplexer bindings.
> 
> Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
> ---
>  .../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml  | 80 ++++++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.example.dtb: fan@18: '#cooling-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240506-dev-mule-i2c-mux-v2-2-a91c954f65d7@cherry.de

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.