mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: tianyu.lan@intel.com
Cc: lenb@kernel.org, linux-acpi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/5] ACPI/AC: Remove AC's proc directory.
Date: Sat, 12 Oct 2013 01:01:22 +0200	[thread overview]
Message-ID: <1715316.EdxkDM8pIb@vostro.rjw.lan> (raw)
In-Reply-To: <1381456451-22877-1-git-send-email-tianyu.lan@intel.com>

On Friday, October 11, 2013 09:54:07 AM tianyu.lan@intel.com wrote:
> From: Lan Tianyu <tianyu.lan@intel.com>
> 
> AC's proc directory is not used and so remove it. Prepare for removing
> /proc/acpi directory.
> 
> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>

Can you please rebase this patch on top of current linux-pm.git/linux-next
and resend?  It introduced some build problems in bleeding-edge, so I had
to drop it.

Thanks!

> ---
>  drivers/acpi/ac.c | 128 +-----------------------------------------------------
>  1 file changed, 2 insertions(+), 126 deletions(-)
> 
> diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
> index f37beaa3..7d28e1a 100644
> --- a/drivers/acpi/ac.c
> +++ b/drivers/acpi/ac.c
> @@ -30,10 +30,6 @@
>  #include <linux/types.h>
>  #include <linux/dmi.h>
>  #include <linux/delay.h>
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -#include <linux/proc_fs.h>
> -#include <linux/seq_file.h>
> -#endif
>  #include <linux/power_supply.h>
>  #include <acpi/acpi_bus.h>
>  #include <acpi/acpi_drivers.h>
> @@ -55,12 +51,6 @@ MODULE_AUTHOR("Paul Diefenbaugh");
>  MODULE_DESCRIPTION("ACPI AC Adapter Driver");
>  MODULE_LICENSE("GPL");
>  
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -extern struct proc_dir_entry *acpi_lock_ac_dir(void);
> -extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
> -static int acpi_ac_open_fs(struct inode *inode, struct file *file);
> -#endif
> -
>  static int acpi_ac_add(struct acpi_device *device);
>  static int acpi_ac_remove(struct acpi_device *device);
>  static void acpi_ac_notify(struct acpi_device *device, u32 event);
> @@ -99,16 +89,6 @@ struct acpi_ac {
>  
>  #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger)
>  
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -static const struct file_operations acpi_ac_fops = {
> -	.owner = THIS_MODULE,
> -	.open = acpi_ac_open_fs,
> -	.read = seq_read,
> -	.llseek = seq_lseek,
> -	.release = single_release,
> -};
> -#endif
> -
>  /* --------------------------------------------------------------------------
>                                 AC Adapter Management
>     -------------------------------------------------------------------------- */
> @@ -160,83 +140,6 @@ static enum power_supply_property ac_props[] = {
>  	POWER_SUPPLY_PROP_ONLINE,
>  };
>  
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -/* --------------------------------------------------------------------------
> -                              FS Interface (/proc)
> -   -------------------------------------------------------------------------- */
> -
> -static struct proc_dir_entry *acpi_ac_dir;
> -
> -static int acpi_ac_seq_show(struct seq_file *seq, void *offset)
> -{
> -	struct acpi_ac *ac = seq->private;
> -
> -
> -	if (!ac)
> -		return 0;
> -
> -	if (acpi_ac_get_state(ac)) {
> -		seq_puts(seq, "ERROR: Unable to read AC Adapter state\n");
> -		return 0;
> -	}
> -
> -	seq_puts(seq, "state:                   ");
> -	switch (ac->state) {
> -	case ACPI_AC_STATUS_OFFLINE:
> -		seq_puts(seq, "off-line\n");
> -		break;
> -	case ACPI_AC_STATUS_ONLINE:
> -		seq_puts(seq, "on-line\n");
> -		break;
> -	default:
> -		seq_puts(seq, "unknown\n");
> -		break;
> -	}
> -
> -	return 0;
> -}
> -
> -static int acpi_ac_open_fs(struct inode *inode, struct file *file)
> -{
> -	return single_open(file, acpi_ac_seq_show, PDE_DATA(inode));
> -}
> -
> -static int acpi_ac_add_fs(struct acpi_device *device)
> -{
> -	struct proc_dir_entry *entry = NULL;
> -
> -	printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded,"
> -			" please retry with CONFIG_ACPI_PROCFS_POWER cleared\n");
> -	if (!acpi_device_dir(device)) {
> -		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
> -						     acpi_ac_dir);
> -		if (!acpi_device_dir(device))
> -			return -ENODEV;
> -	}
> -
> -	/* 'state' [R] */
> -	entry = proc_create_data(ACPI_AC_FILE_STATE,
> -				 S_IRUGO, acpi_device_dir(device),
> -				 &acpi_ac_fops, acpi_driver_data(device));
> -	if (!entry)
> -		return -ENODEV;
> -	return 0;
> -}
> -
> -static int acpi_ac_remove_fs(struct acpi_device *device)
> -{
> -
> -	if (acpi_device_dir(device)) {
> -		remove_proc_entry(ACPI_AC_FILE_STATE, acpi_device_dir(device));
> -
> -		remove_proc_entry(acpi_device_bid(device), acpi_ac_dir);
> -		acpi_device_dir(device) = NULL;
> -	}
> -
> -	return 0;
> -}
> -#endif
> -
>  /* --------------------------------------------------------------------------
>                                     Driver Model
>     -------------------------------------------------------------------------- */
> @@ -317,11 +220,6 @@ static int acpi_ac_add(struct acpi_device *device)
>  	if (result)
>  		goto end;
>  
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -	result = acpi_ac_add_fs(device);
> -#endif
> -	if (result)
> -		goto end;
>  	ac->charger.name = acpi_device_bid(device);
>  	ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
>  	ac->charger.properties = ac_props;
> @@ -336,12 +234,8 @@ static int acpi_ac_add(struct acpi_device *device)
>  	       ac->state ? "on-line" : "off-line");
>  
>        end:
> -	if (result) {
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -		acpi_ac_remove_fs(device);
> -#endif
> +	if (result)
>  		kfree(ac);
> -	}
>  
>  	dmi_check_system(ac_dmi_table);
>  	return result;
> @@ -381,9 +275,6 @@ static int acpi_ac_remove(struct acpi_device *device)
>  
>  	if (ac->charger.dev)
>  		power_supply_unregister(&ac->charger);
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -	acpi_ac_remove_fs(device);
> -#endif
>  
>  	kfree(ac);
>  
> @@ -397,19 +288,9 @@ static int __init acpi_ac_init(void)
>  	if (acpi_disabled)
>  		return -ENODEV;
>  
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -	acpi_ac_dir = acpi_lock_ac_dir();
> -	if (!acpi_ac_dir)
> -		return -ENODEV;
> -#endif
> -
>  	result = acpi_bus_register_driver(&acpi_ac_driver);
> -	if (result < 0) {
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -		acpi_unlock_ac_dir(acpi_ac_dir);
> -#endif
> +	if (result < 0)
>  		return -ENODEV;
> -	}
>  
>  	return 0;
>  }
> @@ -418,11 +299,6 @@ static void __exit acpi_ac_exit(void)
>  {
>  
>  	acpi_bus_unregister_driver(&acpi_ac_driver);
> -
> -#ifdef CONFIG_ACPI_PROCFS_POWER
> -	acpi_unlock_ac_dir(acpi_ac_dir);
> -#endif
> -
>  	return;
>  }
>  
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

      parent reply	other threads:[~2013-10-11 22:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-11  1:54 tianyu.lan
2013-10-11  1:54 ` [PATCH 2/5] ACPI/Battery: Remove battery's " tianyu.lan
2013-10-11  1:54 ` [PATCH 3/5] ACPI/SBS: Remove SBS's " tianyu.lan
2013-10-11  1:54 ` [PATCH 4/5] ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c tianyu.lan
2013-10-11  1:54 ` [PATCH 5/5] ACPI/Proc: Remove alarm proc file tianyu.lan
2013-10-11 23:01 ` Rafael J. Wysocki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1715316.EdxkDM8pIb@vostro.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tianyu.lan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome