From: Kasper Peeters <kasper.peeters@aei.mpg.de>
To: linux-kernel@vger.kernel.org
Subject: crash upon rmmod aic7xxx (pcmcia)
Date: Sun, 11 Sep 2005 14:40:51 +0200 [thread overview]
Message-ID: <17188.9683.311780.197075@sbox13.aei.mpg.de> (raw)
Hi,
Since the early 2.6.x kernels, removing the aic7xxx module (either by
doing a 'rmmod' by hand or by ejecting the pcmcia aic7xxx card) locks
the system hard after about 2 seconds, leaving no trace in syslog.
Just checked with kernel 2.6.13 (and pcmcia-tools 3.2.8).
Upon insertion of the pcmcia card, this appears in syslog:
Sep 11 14:36:05 whiteroom2 kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
Sep 11 14:36:05 whiteroom2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low
) -> IRQ 11
Sep 11 14:36:05 whiteroom2 kernel: aic7xxx: PCI Device 3:0:0 failed memory mapped test. Using PIO.
Sep 11 14:36:05 whiteroom2 kernel: ahc_pci:3:0:0: Host Adapter Bios disabled. Using default SCSI device pa
rameters
Sep 11 14:36:05 whiteroom2 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
Sep 11 14:36:05 whiteroom2 kernel: <Adaptec 1480A Ultra SCSI adapter>
Sep 11 14:36:05 whiteroom2 kernel: aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Sep 11 14:36:05 whiteroom2 kernel:
Sep 11 14:36:12 whiteroom2 kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Sep 11 14:36:12 whiteroom2 kernel: scsi0: Signaled a Target Abort
Sep 11 14:36:21 whiteroom2 kernel: Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c
Sep 11 14:36:21 whiteroom2 kernel: Type: CD-ROM ANSI SCSI revision: 04
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: asynchronous.
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Beginning Domain Validation
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Domain Validation skipping write tests
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Ending Domain Validation
Sep 11 14:36:21 whiteroom2 kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Sep 11 14:36:21 whiteroom2 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0, type 5
Sep 11 14:36:22 whiteroom2 scsi.agent[3014]: cdrom at /devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/0000:03
:00.0/host0/target0:0:4/0:0:4:0
Can someone give me a hand pinning down this bug?
(Please CC replies to me directly).
Kasper
next reply other threads:[~2005-09-11 12:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-11 12:40 Kasper Peeters [this message]
2005-09-11 14:52 ` Daniel Drake
[not found] ` <17188.28765.826177.728033@sbox13.aei.mpg.de>
2005-09-11 18:24 ` Daniel Drake
2005-09-11 19:30 ` Kasper Peeters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17188.9683.311780.197075@sbox13.aei.mpg.de \
--to=kasper.peeters@aei.mpg.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®