Re: [PATCH 1/2] dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 24 Jun 2024 16:12:38 +0530, Thippeswamy Havalige wrote:
> Add YAML devicetree schemas for Xilinx QDMA Soft IP PCIe Root Port Bridge.
> 
> Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
> ---
>  .../devicetree/bindings/pci/xlnx,xdma-host.yaml    | 41 ++++++++++++++++++++--
>  1 file changed, 39 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dts:55.31-79.15: Warning (pci_bridge): /example-0/soc/axi-pcie@80000000: node name is not "pci" or "pcie"
Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: $nodename:0: 'axi-pcie@80000000' does not match '^pcie?@'
	from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240624104239.132159-2-thippesw@amd.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.