Re: [PATCH v5 3/7] dt-bindings: mikrobus: Add mikrobus-spi binding

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 27 Jun 2024 21:56:13 +0530, Ayush Singh wrote:
> Add bindings for MikroBUS boards using SPI interface.
> 
> Almost all of the properties that are valid for SPI devices can be used
> except reg. Since the goal is to allow use of the same MikroBUS board
> across different connectors, config needs to be independent of the actual
> SPI controller in mikroBUS port(s), it is not possible to define the
> chipselect by number in advance. Thus, `spi-cs-apply` property is used to
> specify the chipselect(s) by name.
> 
> Another important fact is that while there is a CS pin in the mikroBUS
> connector, some boards (eg SPI Extend Click) use additional pins as
> chipselect. Thus we need a way to specify the CS pin(s) in terms of
> mikcrobus-connector which can then handle bindings the actual CS pin(s).
> 
> Link: https://www.mikroe.com/spi-extend-click SPI Extend Click
> 
> Signed-off-by: Ayush Singh <ayush@beagleboard.org>
> ---
>  .../devicetree/bindings/mikrobus/mikrobus-spi.yaml | 37 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 38 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: compatible: ['maxim,max31855k', 'mikrobus,spi'] is too long
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: Unevaluated properties are not allowed ('compatible', 'pinctrl-apply', 'spi-cs-apply' were unexpected)
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: /example-0/thermo-click: failed to match any schema with compatible: ['maxim,max31855k', 'mikrobus,spi']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627-mikrobus-scratch-spi-v5-3-9e6c148bf5f0@beagleboard.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.