Re: [PATCH v9 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 02 Jul 2024 22:12:33 +0800, Yasin Lee wrote:
> A capacitive proximity sensor
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
> ---
>  .../bindings/iio/proximity/tyhx,hx9023s.yaml       | 93 ++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@0: Unevaluated properties are not allowed ('single-channel' was unexpected)
	from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@1: Unevaluated properties are not allowed ('single-channel' was unexpected)
	from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@2: Unevaluated properties are not allowed ('single-channel' was unexpected)
	from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.