Re: [PATCH v2 1/1] dt-bindings: extcon: ptn5150: add child node port

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 15 Aug 2024 16:32:44 -0400, Frank Li wrote:
> Add child node 'port' to allow connect to usb controller to do role-switch.
> Add example for id pin of ptn5150 have not connect to main chip's usb id
> pin.
> 
> Fix below warning:
> arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Change from v1 to v2
> - add example for id pin have not connect to main chip's id example.
> - commit 095b96b2b fix "port" warning, but add new warning "connector" is
> not exist. And follow commit revert this change.
> 690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
> - I have not board in hand to debug why "connector" is not work.
> ---
>  .../bindings/extcon/extcon-ptn5150.yaml       | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/extcon/extcon-ptn5150.example.dtb: usb@32e40000: interrupts: [[4294967295, 0], [40, 4]] is too long
	from schema $id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240815203244.96963-1-Frank.Li@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.