From: "Rob Herring (Arm)" <robh@kernel.org>
To: Yixun Lan <dlan@gentoo.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>,
Palmer Dabbelt <palmer@dabbelt.com>,
Inochi Amaoto <inochiama@outlook.com>,
Icenowy Zheng <uwu@icenowy.me>,
Meng Zhang <zhangmeng.kevin@spacemit.com>,
Jisheng Zhang <jszhang@kernel.org>,
linux-riscv@lists.infradead.org, Yangyu Chen <cyy@cyyself.name>,
Paul Walmsley <paul.walmsley@sifive.com>,
Conor Dooley <conor@kernel.org>,
devicetree@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
Jesse Taube <jesse@rivosinc.com>,
Conor Dooley <conor+dt@kernel.org>,
Meng Zhang <kevin.z.m@hotmail.com>,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-gpio@vger.kernel.org
Subject: Re: [PATCH v2 1/4] dt-binding: pinctrl: spacemit: add documents for K1 SoC
Date: Sun, 25 Aug 2024 09:22:53 -0500 [thread overview]
Message-ID: <172459577302.1848940.15978105845752882956.robh@kernel.org> (raw)
In-Reply-To: <20240825-02-k1-pinctrl-v2-1-ddd38a345d12@gentoo.org>
On Sun, 25 Aug 2024 13:10:02 +0000, Yixun Lan wrote:
> Add dt-binding for the pinctrl driver of SpacemiT's K1 SoC.
>
> Two vendor specific properties are introduced here, As the pinctrl
> has dedicated slew rate enable control - bit[7], so we have
> spacemit,slew-rate-{enable,disable} for this. For the same reason,
> creating spacemit,strong-pull-up for the strong pull up control.
>
> Signed-off-by: Yixun Lan <dlan@gentoo.org>
> ---
> .../bindings/pinctrl/spacemit,k1-pinctrl.yaml | 134 +++++++++++++++++
> include/dt-bindings/pinctrl/spacemit,k1-pinctrl.h | 161 +++++++++++++++++++++
> 2 files changed, 295 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml: patternProperties:-cfg$:patternProperties:-pins$:properties:drive-strength-microamp: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.example.dtb: dsi-phy@10215000: drive-strength-microamp: 4000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.example.dtb: dsi-phy@10215000: drive-strength-microamp: 4000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.example.dtb: pinctrl@10005000: i2c0-pins:pins1:drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.example.dtb: pins1: drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.example.dtb: pinctrl@10005000: i2c0-pins:pins:drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8186-pinctrl.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.example.dtb: pins: drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.example.dtb: pinctrl@10005000: i2c0-pins:pins:drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8195-pinctrl.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.example.dtb: pins: drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.example.dtb: pinctrl@10005000: i2c0-pins:pins:drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.example.dtb: pins: drive-strength-microamp: 1000 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.example.dtb: pinctrl@d401e000: '#gpio-range-cells', '#pinctrl-cells' do not match any of the regexes: '-cfg$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pinctrl/spacemit,k1-pinctrl.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.example.dtb: uart0-2-pins: drive-strength-microamp: 32 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240825-02-k1-pinctrl-v2-1-ddd38a345d12@gentoo.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
next prev parent reply other threads:[~2024-08-25 14:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-25 13:10 [PATCH v2 0/4] riscv: spacemit: add pinctrl support to " Yixun Lan
2024-08-25 13:10 ` [PATCH v2 1/4] dt-binding: pinctrl: spacemit: add documents for " Yixun Lan
2024-08-25 13:48 ` Krzysztof Kozlowski
2024-08-26 1:36 ` Yixun Lan
2024-08-26 4:19 ` Inochi Amaoto
[not found] ` <66cbdc2a.050a0220.2d7994.f671SMTPIN_ADDED_BROKEN@mx.google.com>
2024-08-26 5:37 ` Krzysztof Kozlowski
2024-08-25 14:22 ` Rob Herring (Arm) [this message]
2024-08-26 3:09 ` Yixun Lan
2024-08-26 4:23 ` Inochi Amaoto
[not found] ` <66cbf3bb.050a0220.2632ed.b191SMTPIN_ADDED_BROKEN@mx.google.com>
2024-08-26 16:22 ` Conor Dooley
2024-08-27 2:23 ` Yixun Lan
[not found] ` <66cd3abe.050a0220.bf184.b4feSMTPIN_ADDED_BROKEN@mx.google.com>
2024-08-27 15:13 ` Conor Dooley
2024-08-25 13:10 ` [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT " Yixun Lan
2024-08-26 8:16 ` Inochi Amaoto
2024-08-27 3:30 ` Yixun Lan
2024-08-25 13:10 ` [PATCH v2 3/4] riscv: dts: spacemit: add pinctrl support for " Yixun Lan
2024-08-26 7:55 ` Inochi Amaoto
2024-08-27 3:03 ` Yixun Lan
2024-08-25 13:10 ` [PATCH v2 4/4] riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3 Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=172459577302.1848940.15978105845752882956.robh@kernel.org \
--to=robh@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=inochiama@outlook.com \
--cc=jesse@rivosinc.com \
--cc=jszhang@kernel.org \
--cc=kevin.z.m@hotmail.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=uwu@icenowy.me \
--cc=zhangmeng.kevin@spacemit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®