From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, shengjiu.wang@gmail.com
Subject: [PATCH 3/3] arm64: dts: imx93-9x9-qsb: Add PDM microphone sound card support
Date: Tue, 10 Sep 2024 15:19:32 +0800 [thread overview]
Message-ID: <1725952772-30357-4-git-send-email-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <1725952772-30357-1-git-send-email-shengjiu.wang@nxp.com>
Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone
and convert the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
.../boot/dts/freescale/imx93-9x9-qsb.dts | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index d213a5343803..1340f5462d11 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -122,6 +122,18 @@ simple-audio-card,codec {
};
};
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
sound-wm8962 {
compatible = "fsl,imx-audio-wm8962";
model = "wm8962-audio";
@@ -266,6 +278,12 @@ pcal6524: gpio@22 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcal6524>;
+ mic-can-sel-hog {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+
exp-sel-hog {
gpio-hog;
gpios = <22 GPIO_ACTIVE_HIGH>;
@@ -355,6 +373,15 @@ &lpuart1 { /* console */
status = "okay";
};
+&micfil {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&clk IMX93_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <49152000>;
+ status = "okay";
+};
+
&mu1 {
status = "okay";
};
@@ -535,6 +562,14 @@ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__PDM_CLK 0x31e
+ MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
+ MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
--
2.34.1
next prev parent reply other threads:[~2024-09-10 7:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-10 7:19 [PATCH 0/3] arm64: dts: imx93-9x9-qsb: Add " Shengjiu Wang
2024-09-10 7:19 ` [PATCH 1/3] arm64: dts: imx93-9x9-qsb: Enable sound-wm8962 sound card Shengjiu Wang
2024-09-10 15:40 ` Frank Li
2024-09-10 7:19 ` [PATCH 2/3] arm64: dts: imx93-9x9-qsb: add bt-sco sound card support Shengjiu Wang
2024-09-10 15:42 ` Frank Li
2024-09-10 7:19 ` Shengjiu Wang [this message]
2024-09-10 15:46 ` [PATCH 3/3] arm64: dts: imx93-9x9-qsb: Add PDM microphone " Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1725952772-30357-4-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®