Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 07 Oct 2024 11:32:04 +0200, Francesco Dolcini wrote:
> From: Parth Pancholi <parth.pancholi@toradex.com>
> 
> Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI
> host controller. The controller supports software configuration
> through PCIe registers, such as controlling the PWRONx polarity
> via the USB control register (E0h).
> 
> Similar generic PCIe-based bindings can be found as qcom,ath11k-pci.yaml
> as an example.
> 
> Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf
> Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
> v2: rename property to ti,tusb7320-pwron-active-high and change type to flag
> ---
>  .../bindings/usb/ti,tusb73x0-pci.yaml         | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.example.dtb: pcie@0: usb@0:compatible: ['pci104C,8241'] does not contain items matching the given schema
	from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241007093205.27130-2-francesco@dolcini.it

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.