Re: [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 10 Oct 2024 23:00:23 +0200, vamoirid wrote:
> From: Vasileios Amoiridis <vassilisamir@gmail.com>
> 
> Add dt-binding for BME680 gas sensor device. The device incorporates as
> well temperature, pressure and relative humidity sensors.
> 
> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
> ---
>  .../bindings/iio/chemical/bosch,bme680.yaml   | 64 +++++++++++++++++++
>  1 file changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Warning: Duplicate compatible "bosch,bme680" found in schemas matching "$id":
	http://devicetree.org/schemas/iio/chemical/bosch,bme680.yaml#
	http://devicetree.org/schemas/trivial-devices.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.example.dtb: bme680@77: 'vdd-supply', 'vddio-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.example.dtb: bme680@0: 'vdd-supply', 'vddio-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010210030.33309-7-vassilisamir@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.