From: "Rob Herring (Arm)" <robh@kernel.org>
To: George Chan <gchan9527@gmail.com>
Cc: linux-input@vger.kernel.org, Henrik Rydberg <rydberg@bitmath.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Del Regno <kholk11@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: Re: [PATCH RFC/RFT 0/3] Add support to Novatek's touch IC nt36xxx
Date: Tue, 15 Oct 2024 09:17:51 -0500 [thread overview]
Message-ID: <172900161342.733407.14343301296469733039.robh@kernel.org> (raw)
In-Reply-To: <20241015-nt36xxx-v1-0-3919d0bffee6@gmail.com>
On Tue, 15 Oct 2024 20:53:28 +0800, George Chan wrote:
> Initially support for nt36xxx series spi device. Below
> list all supported varients:
>
> - NT36675
> - NT36672A
> - NT36772(?)
> - NT36525
> - NT36676F
>
> I had tested it with Redmi note 9 pro, aka NT36675 chip.
>
> This series is based on my repo below:
> https://github.com/99degree/linux/tree/nt36xxx
>
> There is a boot-and-functional tree for miatoll device:
> https://github.com/99degree/linux/tree/working-20241015
>
> And the older dev history:
> https://github.com/99degree/linux/tree/nt36xxx_old
> https://github.com/99degree/linux/tree/working-20230528/drivers/input/touchscreen
>
> This driver is based on
> AngeloGioacchino Del Regno for i2c based drive
> https://patchwork.kernel.org/project/linux-input/cover/20201028221302.66583-1-kholk11@gmail.com/#24831734
>
> _AND_
> Neil Armstrong for the spi device codes
> https://patchwork.kernel.org/project/linux-input/patch/20231213-topic-goodix-berlin-upstream-initial-v13-2-5d7a26a5eaa2@linaro.org/
>
> Download fw function is adapted from original vendor driver
> https://github.com/LineageOS/android_kernel_xiaomi_sm6250/tree/lineage-21/drivers/input/touchscreen/nt36xxx_spi/
>
> Panel follower functionality is finally added.
>
> Since the driver is split into core+spi so i2c function is relatively
> easily to add.
>
> Signed-off-by: George Chan <gchan9527@gmail.com>
> ---
> George Chan (3):
> dt-bindings: touchscreen: Add binding for Novatek NT36xxx series driver
> [RFC/RFT]Input: Add Novatek NT36xxx touchscreen driver
> dts: sm7125-xiaomi-joyeuse: Sample device tree for reference
>
> .../bindings/input/touchscreen/nt36xxx.yaml | 70 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/sm7125-xiaomi-joyeuse-touch.dts | 183 +++
> drivers/input/touchscreen/Kconfig | 13 +
> drivers/input/touchscreen/Makefile | 2 +
> drivers/input/touchscreen/nt36xxx.h | 142 ++
> drivers/input/touchscreen/nt36xxx_core.c | 1422 ++++++++++++++++++++
> drivers/input/touchscreen/nt36xxx_spi.c | 256 ++++
> 8 files changed, 2089 insertions(+)
> ---
> base-commit: b852e1e7a0389ed6168ef1d38eb0bad71a6b11e8
> change-id: 20241015-nt36xxx-07e458ba2877
>
> Best regards,
> --
> George Chan <gchan9527@gmail.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/sm7125-xiaomi-joyeuse-touch.dtb' for 20241015-nt36xxx-v1-0-3919d0bffee6@gmail.com:
arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse-touch.dts:9:10: fatal error: sm7125-xiaomi-joyeuse-display.dts: No such file or directory
9 | #include "sm7125-xiaomi-joyeuse-display.dts"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse-touch.dtb] Error 1
make[2]: *** [scripts/Makefile.build:478: arch/arm64/boot/dts/qcom] Error 2
make[2]: Target 'arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse-touch.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1412: qcom/sm7125-xiaomi-joyeuse-touch.dtb] Error 2
make: *** [Makefile:224: __sub-make] Error 2
make: Target 'qcom/sm7125-xiaomi-joyeuse-touch.dtb' not remade because of errors.
prev parent reply other threads:[~2024-10-15 14:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 12:53 George Chan via B4 Relay
2024-10-15 12:53 ` [PATCH RFC/RFT 1/3] dt-bindings: touchscreen: Add binding for Novatek NT36xxx series driver George Chan via B4 Relay
2024-10-15 13:39 ` Krzysztof Kozlowski
2024-10-15 14:27 ` Rob Herring (Arm)
2024-10-15 12:53 ` [PATCH RFC/RFT 2/3] Input: Add Novatek NT36xxx touchscreen driver George Chan via B4 Relay
2024-10-15 12:53 ` [PATCH RFC/RFT 3/3] dts: sm7125-xiaomi-joyeuse: Sample device tree for reference George Chan via B4 Relay
2024-10-15 14:17 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=172900161342.733407.14343301296469733039.robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gchan9527@gmail.com \
--cc=kholk11@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®