Re: [PATCH v2 1/2] dt-bindings: dma: adi,axi-dmac: convert to yaml schema

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 29 Oct 2024 14:29:14 -0500, David Lechner wrote:
> Convert the AXI DMAC bindings from .txt to .yaml.
> 
> Acked-by: Nuno Sa <nuno.sa@analog.com>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---
> 
> For the maintainer, Lars is the original author, but isn't really
> active with ADI anymore, so I have added Nuno instead since he is the
> most active ADI representative currently and is knowledgeable about this
> hardware.
> 
> As in v1, the rob-bot is likely to complain with the following:
> 
> 	Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected
> 		hint: A vendor boolean property can use "type: boolean"
> 		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
> 	DTC [C] Documentation/devicetree/bindings/dma/adi,axi-dmac.example.dtb
> 
> This is due to the fact that we have a vendor prefix on an object node.
> We can't change that since it is an existing binding. Rob said he will
> fix this in dtschema.
> ---
>  .../devicetree/bindings/dma/adi,axi-dmac.txt       |  61 ---------
>  .../devicetree/bindings/dma/adi,axi-dmac.yaml      | 139 +++++++++++++++++++++
>  2 files changed, 139 insertions(+), 61 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected
	hint: A vendor boolean property can use "type: boolean"
	from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241029-axi-dma-dt-yaml-v2-1-52a6ec7df251@baylibre.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.