From: "Rob Herring (Arm)" <robh@kernel.org>
To: Alexey Charkov <alchark@gmail.com>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-rockchip@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH 0/2] arm64: dts: rockchip: Add H96 Max V58 (RK3588 based TV box)
Date: Mon, 06 Jan 2025 13:27:59 -0600 [thread overview]
Message-ID: <173619154694.838812.1604486663887944578.robh@kernel.org> (raw)
In-Reply-To: <20250106-rk3588-h96-max-v58-v1-0-d25255f851fc@gmail.com>
On Mon, 06 Jan 2025 01:07:16 +0400, Alexey Charkov wrote:
> H96 Max V58 is a compact TV box based on Rockchip RK3588 SoC [1]
> that ships with Android by default. Add support for it.
>
> Note that there is no publicly available hardware documentation,
> nor vendor sources to be used as a reference, so this implementation
> is best effort based on poking around my board and staring at the
> decompiled stock DTB. It works for me, but improvement suggestions
> are very much welcome.
>
> HDMI output is not tested, but expected to work.
>
> SPDIF output is not enabled (base RK3588 .dtsi needs amendment)
>
> Auxiliary LED display is not enabled (no mainline driver available).
> The controller used is FD6551 connected to GPIO3 RK_PC7 (clk) and
> GPIO3 RK_PD0 (data), which happen to be the right pins for
> i2c5m0_xfer pinctrl config, and thus might potentially be used with
> the hardware I2C5 controller (to be verified). Out of tree userspace
> driver is available at [2].
>
> [1] https://www.h96tvbox.com/product/h96max-v58/
> [2] https://github.com/arthur-liberman/linux_openvfd/blob/master/driver/controllers/fd650.c
>
> Signed-off-by: Alexey Charkov <alchark@gmail.com>
> ---
> Alexey Charkov (2):
> dt-bindings: arm: rockchip: Add H96 Max V58 TV box
> arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
>
> .../devicetree/bindings/arm/rockchip.yaml | 5 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 785 +++++++++++++++++++++
> 3 files changed, 791 insertions(+)
> ---
> base-commit: af349ca4d3f8659d84abc667125c826fda155109
> change-id: 20240618-rk3588-h96-max-v58-c2c1bf8e6996
>
> Best regards,
> --
> Alexey Charkov <alchark@gmail.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y rockchip/rk3588-h96-max-v58.dtb' for 20250106-rk3588-h96-max-v58-v1-0-d25255f851fc@gmail.com:
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: syscon@fd5d0000: usb2phy@0:otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: usb2phy@0: otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: gpios: [[267, 1, 0], [187, 20, 0]] is too long
from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: Unevaluated properties are not allowed ('gpios' was unexpected)
from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
next prev parent reply other threads:[~2025-01-06 19:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-05 21:07 Alexey Charkov
2025-01-05 21:07 ` [PATCH 1/2] dt-bindings: arm: rockchip: Add H96 Max V58 TV box Alexey Charkov
2025-01-07 7:11 ` Krzysztof Kozlowski
2025-01-08 9:16 ` Alexey Charkov
2025-01-05 21:07 ` [PATCH 2/2] arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC Alexey Charkov
2025-01-06 19:27 ` Rob Herring (Arm) [this message]
2025-01-06 19:50 ` [PATCH 0/2] arm64: dts: rockchip: Add H96 Max V58 (RK3588 based TV box) Alexey Charkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=173619154694.838812.1604486663887944578.robh@kernel.org \
--to=robh@kernel.org \
--cc=alchark@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®