Re: [PATCH V5 3/5] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC

["Rob Herring (Arm)" <robh@kernel.org>]

On Sat, 01 Feb 2025 00:02:40 +0530, Jishnu Prakash wrote:
> For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
> 
> It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
> going through PBS(Programmable Boot Sequence) firmware through a single
> register interface. This interface is implemented on SDAM (Shared
> Direct Access Memory) peripherals on the master PMIC PMK8550 rather
> than a dedicated ADC peripheral.
> 
> Add documentation for PMIC5 Gen3 ADC and macro definitions for ADC
> channels and virtual channels (combination of ADC channel number and
> PMIC SID number) per PMIC, to be used by clients of this device.
> 
> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> ---
> Changes since v4:
> - Added ADC5 Gen3 documentation in a separate new file to avoid complicating
>   existing VADC documentation file further to accomodate this device, as
>   suggested by reviewer.
> 
> Changes since v3:
> - Added ADC5 Gen3 documentation changes in existing qcom,spmi-vadc.yaml file
>   instead of adding separate file and updated top-level constraints in documentation
>   file based on discussion with reviewers.
> - Dropped default SID definitions.
> - Addressed other reviewer comments.
> 
> Changes since v2:
> - Moved ADC5 Gen3 documentation into a separate new file.
> 
> Changes since v1:
> - Updated properties separately for all compatibles to clarify usage
>   of new properties and updates in usage of old properties for ADC5 Gen3.
> - Avoided updating 'adc7' name to 'adc5 gen2' and just left a comment
>   mentioning this convention.
> - Used predefined channel IDs in individual PMIC channel definitions
>   instead of numeric IDs.
> - Addressed other comments from reviewers.
> 
>  .../bindings/iio/adc/qcom,spmi-adc5-gen3.yaml | 157 ++++++++++++++++++
>  .../iio/adc/qcom,spmi-vadc-common.yaml        |   4 +-
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml      |   2 +
>  .../iio/adc/qcom,spmi-adc5-gen3-pm8550.h      |  46 +++++
>  .../iio/adc/qcom,spmi-adc5-gen3-pm8550b.h     |  85 ++++++++++
>  .../iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h    |  22 +++
>  .../iio/adc/qcom,spmi-adc5-gen3-pmk8550.h     |  52 ++++++
>  include/dt-bindings/iio/adc/qcom,spmi-vadc.h  |  81 +++++++++
>  8 files changed, 447 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
>  create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550.h
>  create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550b.h
>  create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h
>  create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pmk8550.h
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250131183242.3653595-4-jishnu.prakash@oss.qualcomm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.