mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Timothy Pearson <tpearson@raptorengineering.com>
To: Timothy Pearson <tpearson@raptorengineering.com>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	 linux-kernel <linux-kernel@vger.kernel.org>,
	 linux-pci <linux-pci@vger.kernel.org>,
	 Madhavan Srinivasan <maddy@linux.ibm.com>,
	 Michael Ellerman <mpe@ellerman.id.au>,
	 christophe leroy <christophe.leroy@csgroup.eu>,
	 Naveen N Rao <naveen@kernel.org>,
	 Bjorn Helgaas <bhelgaas@google.com>,
	 Shawn Anastasio <sanastasio@raptorengineering.com>
Subject: [PATCH v2 2/6] pci/hotplug/pnv_php: Work around switches with broken
Date: Wed, 18 Jun 2025 11:56:54 -0500 (CDT)	[thread overview]
Message-ID: <1741778252.1310636.1750265814430.JavaMail.zimbra@raptorengineeringinc.com> (raw)
In-Reply-To: <581463409.1310624.1750265668004.JavaMail.zimbra@raptorengineeringinc.com>

 presence detection

The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.

Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.

Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
---
 drivers/pci/hotplug/pnv_php.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index aec0a6d594ac..bac8af3df41a 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -391,6 +391,20 @@ static int pnv_php_get_power_state(struct hotplug_slot *slot, u8 *state)
 	return 0;
 }
 
+static int pcie_check_link_active(struct pci_dev *pdev)
+{
+	u16 lnk_status;
+	int ret;
+
+	ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(lnk_status))
+		return -ENODEV;
+
+	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+	return ret;
+}
+
 static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state)
 {
 	struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
@@ -403,6 +417,19 @@ static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state)
 	 */
 	ret = pnv_pci_get_presence_state(php_slot->id, &presence);
 	if (ret >= 0) {
+		if (pci_pcie_type(php_slot->pdev) == PCI_EXP_TYPE_DOWNSTREAM &&
+			presence == OPAL_PCI_SLOT_EMPTY) {
+			/*
+			 * Similar to pciehp_hpc, check whether the Link Active
+			 * bit is set to account for broken downstream bridges
+			 * that don't properly assert Presence Detect State, as
+			 * was observed on the Microsemi Switchtec PM8533 PFX
+			 * [11f8:8533].
+			 */
+			if (pcie_check_link_active(php_slot->pdev) > 0)
+				presence = OPAL_PCI_SLOT_PRESENT;
+		}
+
 		*state = presence;
 		ret = 0;
 	} else {
-- 
2.39.5

  parent reply	other threads:[~2025-06-18 16:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-18 16:54 [PATCH v2 0/6] PowerNV PCIe Hotplug Driver Fixes Timothy Pearson
2025-06-18 16:56 ` [PATCH v2 1/6] pci/hotplug/pnv_php: Properly clean up allocated IRQs on Timothy Pearson
2025-06-18 16:56 ` Timothy Pearson [this message]
2025-06-18 19:44   ` [PATCH v2 2/6] pci/hotplug/pnv_php: Work around switches with broken Bjorn Helgaas
2025-06-18 19:50     ` Timothy Pearson
2025-06-18 20:17       ` Bjorn Helgaas
2025-06-19 19:29         ` Timothy Pearson
2025-06-20  7:52           ` Lukas Wunner
2025-06-20 16:45             ` Timothy Pearson
2025-06-25  8:45               ` Lukas Wunner
2025-06-18 16:57 ` [PATCH v2 3/6] powerpc/eeh: Export eeh_unfreeze_pe() Timothy Pearson
2025-06-18 16:57 ` [PATCH v2 4/6] powerpc/eeh: Make EEH driver device hotplug safe Timothy Pearson
2025-06-18 16:58 ` [PATCH v2 5/6] pci/hotplug/pnv_php: Fix surprise plug detection and Timothy Pearson
2025-06-18 19:15   ` Bjorn Helgaas
2025-06-19 19:22     ` Timothy Pearson
2025-06-18 16:58 ` [PATCH v2 6/6] pci/hotplug/pnv_php: Enable third attention indicator Timothy Pearson
2025-06-18 19:01   ` Bjorn Helgaas
2025-06-19  0:37     ` Timothy Pearson
2025-06-20  9:26       ` Krishna Kumar
2025-06-21  9:59         ` Lukas Wunner
2025-06-25  4:08           ` Krishna Kumar
2025-06-25  8:08             ` Lukas Wunner
2025-06-25 10:55               ` Krishna Kumar
2025-06-21 15:05         ` Timothy Pearson
2025-06-24  7:07           ` Krishna Kumar
2025-06-24 16:34             ` Timothy Pearson
2025-06-24 22:34       ` Bjorn Helgaas
2025-07-07  8:01         ` Krishna Kumar
2025-07-11 18:18           ` Timothy Pearson
2025-07-11 21:05             ` Bjorn Helgaas
2025-07-15 21:41               ` Timothy Pearson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1741778252.1310636.1750265814430.JavaMail.zimbra@raptorengineeringinc.com \
    --to=tpearson@raptorengineering.com \
    --cc=bhelgaas@google.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=naveen@kernel.org \
    --cc=sanastasio@raptorengineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®