From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
devicetree@vger.kernel.org,
Konrad Dybcio <konradybcio@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/2] arm64: dts: qcom: sm8750: Add sound
Date: Mon, 19 May 2025 08:01:42 -0500 [thread overview]
Message-ID: <174765962935.2025708.17107266351757084631.robh@kernel.org> (raw)
In-Reply-To: <20250519-sm8750-audio-part-2-v2-0-5ac5afdf4ee2@linaro.org>
On Mon, 19 May 2025 11:54:42 +0200, Krzysztof Kozlowski wrote:
> Changes in v2:
> - Patch #1:
> - Use v2.1 compatible with v2.0 fallback (Konrad)
> - Use hex address in <reg>
> - Re-order nodes to keep proper sorting by unit address
> - Patch #2:
> - Re-order codec/cpu nodes (Konrad)
> - Link to v1: https://lore.kernel.org/r/20250424-sm8750-audio-part-2-v1-0-50133a0ec35f@linaro.org
>
> Bindings for the new Soundwire compatible:
> https://lore.kernel.org/r/20250519080453.29858-2-krzysztof.kozlowski@linaro.org/T/#u
>
> Dependencies were merged, so this brings the necessary sound on SM8750
> MTP. I have patches work-in-progress for QRD and also USB headset, but
> this have dependencies and need some cleanup. I will be posting these
> separately.
>
> Best regards,
> Krzysztof
>
> ---
> Krzysztof Kozlowski (2):
> arm64: dts: qcom: sm8750: Add Soundwire nodes
> arm64: dts: qcom: sm8750-mtp: Add sound (speakers, headset codec, dmics)
>
> arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 214 ++++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8750.dtsi | 122 ++++++++++++++++++
> 2 files changed, 336 insertions(+)
> ---
> base-commit: 0fde2d760e610a74f67eee9e757a3d4a95388f36
> change-id: 20241122-sm8750-audio-part-2-943277d85302
>
> Best regards,
> --
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: base-commit 0fde2d760e610a74f67eee9e757a3d4a95388f36 not known, ignoring
Base: attempting to guess base-commit...
Base: tags/v6.15-rc1-312-ga18226be95c7 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250519-sm8750-audio-part-2-v2-0-5ac5afdf4ee2@linaro.org:
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6ab0000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6ab0000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: /soc@0/soundwire@6ab0000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6ad0000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6ad0000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6ad0000 (qcom,soundwire-v2.1.0): Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: /soc@0/soundwire@6ad0000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6b10000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6b10000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@6b10000 (qcom,soundwire-v2.1.0): Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: /soc@0/soundwire@6b10000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@7630000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@7630000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: soundwire@7630000 (qcom,soundwire-v2.1.0): Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: /soc@0/soundwire@7630000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6ab0000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6ab0000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: /soc@0/soundwire@6ab0000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6ad0000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6ad0000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: /soc@0/soundwire@6ad0000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6b10000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@6b10000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: /soc@0/soundwire@6b10000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@7630000 (qcom,soundwire-v2.1.0): compatible:0: 'qcom,soundwire-v2.1.0' is not one of ['qcom,soundwire-v1.3.0', 'qcom,soundwire-v1.5.0', 'qcom,soundwire-v1.5.1', 'qcom,soundwire-v1.6.0', 'qcom,soundwire-v1.7.0', 'qcom,soundwire-v2.0.0']
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: soundwire@7630000 (qcom,soundwire-v2.1.0): compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0'] is too long
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: /soc@0/soundwire@7630000: failed to match any schema with compatible: ['qcom,soundwire-v2.1.0', 'qcom,soundwire-v2.0.0']
prev parent reply other threads:[~2025-05-19 13:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-19 9:54 Krzysztof Kozlowski
2025-05-19 9:54 ` [PATCH v2 1/2] arm64: dts: qcom: sm8750: Add Soundwire nodes Krzysztof Kozlowski
2025-05-20 15:51 ` Konrad Dybcio
2025-05-19 9:54 ` [PATCH v2 2/2] arm64: dts: qcom: sm8750-mtp: Add sound (speakers, headset codec, dmics) Krzysztof Kozlowski
2025-05-20 16:44 ` Konrad Dybcio
2025-05-19 13:01 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=174765962935.2025708.17107266351757084631.robh@kernel.org \
--to=robh@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®