Re: [PATCH] dt-bindings: gpio: gpio-xilinx: Mark clocks as required property

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 10 Jun 2025 09:34:31 +0200, Michal Simek wrote:
> On Microblaze platforms there is no need to handle clocks because the
> system is starting with clocks enabled (can be described via fixed clock
> node or clock-frequency property or not described at all).
> With using soft IPs with SOC platforms there is mandatory to handle clocks
> as is explained in commit 60dbdc6e08d6 ("dt-bindings: net: emaclite: Add
> clock support").
> That's why make clock as required in dt binding because it is present in
> both configurations and should be described even there is no way how to
> handle it on Microblaze systems.
> 
> Signed-off-by: Michal Simek <michal.simek@amd.com>
> ---
> 
> Based on discussion at
> https://lore.kernel.org/lkml/20241002-revivable-crummy-f780adec538c@spud/
> 
> Actually this shouldn't be only targetting GPIO but also for example
> xlnx,xps-timebase-wdt-1.00.a but I would like to check it first on gpio
> before starting to check other bindings.
> 
> ---
>  Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fpga/fpga-region.example.dtb: gpio@40000000 (xlnx,xps-gpio-1.00.a): 'clocks' is a required property
	from schema $id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/dba4f2c39a25b54010c292c36e349cb289d6cd98.1749540869.git.michal.simek@amd.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.