From: "Rob Herring (Arm)" <robh@kernel.org>
To: "Bence Csókás" <csokas.bence@prolan.hu>
Cc: imx@lists.linux.dev, Fabio Estevam <festevam@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org, Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Csaba Buday <buday.csaba@prolan.hu>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios`
Date: Fri, 15 Aug 2025 16:19:11 -0500 [thread overview]
Message-ID: <175529260064.3212410.10009645356875369525.robh@kernel.org> (raw)
In-Reply-To: <20250815-b4-tx6ul-dt-phy-rst-v1-1-9b65e315d9d3@prolan.hu>
On Fri, 15 Aug 2025 17:17:37 +0200, Bence Csókás wrote:
> The Ethernet PHY's reset GPIO should be specified in the node of the PHY
> itself, instead of the MAC (`fec`). The latter is deprecated, and was an
> i.MX-specific extension, incompatible with the new reset controller
> subsystem.
>
> Co-developed-by: Csaba Buday <buday.csaba@prolan.hu>
> Signed-off-by: Csaba Buday <buday.csaba@prolan.hu>
> Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
> ---
> arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 0cc53520e68bea7fb80fdc6bdf8d226d1b6a98d9
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/nxp/' for 20250815-b4-tx6ul-dt-phy-rst-v1-1-9b65e315d9d3@prolan.hu:
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dtb: / (karo,imx6ul-tx6ul): i2c-gpio: {'compatible': ['i2c-gpio'], '#address-cells': 1, '#size-cells': 0, 'pinctrl-names': ['default'], 'pinctrl-0': [[69]], 'sda-gpios': [[48, 1, 0]], 'scl-gpios': [[48, 0, 0]], 'clock-frequency': 400000, 'status': ['okay'], 'rtc@68': {'compatible': ['dallas,ds1339'], 'reg': [[104]], 'status': ['disabled']}} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dtb: / (karo,imx6ul-tx6ul): i2c-gpio: {'compatible': ['i2c-gpio'], '#address-cells': 1, '#size-cells': 0, 'pinctrl-names': ['default'], 'pinctrl-0': [[68]], 'sda-gpios': [[48, 1, 0]], 'scl-gpios': [[48, 0, 0]], 'clock-frequency': 400000, 'status': ['okay'], 'rtc@68': {'compatible': ['dallas,ds1339'], 'reg': [[104]], 'status': ['disabled']}} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dtb: ethernet-phy@0 (ethernet-phy-ieee802.3-c22): 'resets' is a dependency of 'reset-names'
from schema $id: http://devicetree.org/schemas/reset/reset.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dtb: ethernet-phy@0 (ethernet-phy-ieee802.3-c22): 'resets' is a dependency of 'reset-names'
from schema $id: http://devicetree.org/schemas/reset/reset.yaml#
next prev parent reply other threads:[~2025-08-15 21:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-15 15:17 Bence Csókás
2025-08-15 21:19 ` Rob Herring (Arm) [this message]
2025-09-03 7:28 ` Ahmad Fatoum
2025-09-03 7:43 ` Csókás Bence
2025-09-03 7:50 ` Ahmad Fatoum
2025-09-03 7:57 ` Csókás Bence
2025-09-03 8:46 ` Ahmad Fatoum
2025-09-03 8:01 ` Buday Csaba
2025-09-03 8:43 ` Ahmad Fatoum
2025-09-03 9:01 ` Buday Csaba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=175529260064.3212410.10009645356875369525.robh@kernel.org \
--to=robh@kernel.org \
--cc=buday.csaba@prolan.hu \
--cc=conor+dt@kernel.org \
--cc=csokas.bence@prolan.hu \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®