Re: [PATCHv3 1/3] dt-bindings: net: wireless: ath9k: add led bindings

["Rob Herring (Arm)" <robh@kernel.org>]

On Sun, 24 Aug 2025 21:48:10 -0700, Rosen Penev wrote:
> The ath9k driver has various pin GPIO numbers for different chipsets
> which are not always correct for every device.
> 
> Add bindings to specify the correct number and if it should be
> active-low.
> 
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
>  .../bindings/net/wireless/qca,ath9k.yaml         | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:92.15-25: Warning (reg_format): /example-2/ahb/wifi@180c0000/led:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (unit_address_vs_reg): /example-2/ahb/wifi@180c0000/led: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (avoid_default_addr_size): /example-2/ahb/wifi@180c0000/led: Relying on default #address-cells value
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (avoid_default_addr_size): /example-2/ahb/wifi@180c0000/led: Relying on default #size-cells value
Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250825044812.1575524-2-rosenp@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.