mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Support Opensource <support.opensource@diasemi.com>,
	 Lee Jones <lee@kernel.org>,
	linux-kernel@vger.kernel.org,
	 Jens Kehne <jens.kehne@agilent.com>
Subject: Re: (subset) [PATCH] mfd: da9063: Split chip variant reading in two bus transactions
Date: Tue, 02 Sep 2025 09:13:36 +0100	[thread overview]
Message-ID: <175680081626.2184374.7626461049800985884.b4-ty@kernel.org> (raw)
In-Reply-To: <20250804133754.3496718-1-jens.kehne@agilent.com>

On Mon, 04 Aug 2025 15:37:54 +0200, Jens Kehne wrote:
> We observed the initial probe of the da9063 failing in
> da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
> board. The problem originates in da9063_i2c_blockreg_read, which uses
> a single bus transaction to turn the register page and then read a
> register. On the bus, this should translate to a write to register 0,
> followed by a read to the target register, separated by a repeated
> start. However, we found that after the write to register 0, the
> controller sometimes continues directly with the register address of
> the read request, without sending the chip address or a repeated start
> in between, which makes the read request invalid.
> 
> [...]

Applied, thanks!

[1/1] mfd: da9063: Split chip variant reading in two bus transactions
      commit: a0d1178ea4778fc1eb1691a97619ecdb8a3bda13

--
Lee Jones [李琼斯]


      reply	other threads:[~2025-09-02  8:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-04 13:37 Jens Kehne
2025-09-02  8:13 ` Lee Jones [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=175680081626.2184374.7626461049800985884.b4-ty@kernel.org \
    --to=lee@kernel.org \
    --cc=jens.kehne@agilent.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®