mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "tip-bot2 for Wladislav Wiebe" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Wladislav Wiebe <wladislav.wiebe@nokia.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jiri Slaby <jirislaby@kernel.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org, maz@kernel.org
Subject: [tip: irq/core] genirq: Add support for warning on long-running interrupt handlers
Date: Wed, 03 Sep 2025 14:13:00 -0000	[thread overview]
Message-ID: <175690878044.1920.10260472737445670133.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20250804093525.851-1-wladislav.wiebe@nokia.com>

The following commit has been merged into the irq/core branch of tip:

Commit-ID:     673f1244b3d47c9b41cda3473c062bec586387be
Gitweb:        https://git.kernel.org/tip/673f1244b3d47c9b41cda3473c062bec586387be
Author:        Wladislav Wiebe <wladislav.wiebe@nokia.com>
AuthorDate:    Mon, 04 Aug 2025 11:35:25 +02:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Wed, 03 Sep 2025 16:10:40 +02:00

genirq: Add support for warning on long-running interrupt handlers

Introduce a mechanism to detect and warn about prolonged interrupt handlers.
With a new command-line parameter (irqhandler.duration_warn_us=), users can
configure the duration threshold in microseconds when a warning in such
format should be emitted:

"[CPU14] long duration of IRQ[159:bad_irq_handler [long_irq]], took: 1330 us"

The implementation uses local_clock() to measure the execution duration of the
generic IRQ per-CPU event handler.

Signed-off-by: Wladislav Wiebe <wladislav.wiebe@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250804093525.851-1-wladislav.wiebe@nokia.com

---
 Documentation/admin-guide/kernel-parameters.txt |  5 ++-
 kernel/irq/handle.c                             | 49 +++++++++++++++-
 2 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 747a55a..bdbc44f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2606,6 +2606,11 @@
 			for it. Intended to get systems with badly broken
 			firmware running.
 
+	irqhandler.duration_warn_us= [KNL]
+			Warn if an IRQ handler exceeds the specified duration
+			threshold in microseconds. Useful for identifying
+			long-running IRQs in the system.
+
 	irqpoll		[HW]
 			When an interrupt is not handled search all handlers
 			for it. Also check all handlers each timer
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 9489f93..e103451 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -136,6 +136,44 @@ void __irq_wake_thread(struct irq_desc *desc, struct irqaction *action)
 	wake_up_process(action->thread);
 }
 
+static DEFINE_STATIC_KEY_FALSE(irqhandler_duration_check_enabled);
+static u64 irqhandler_duration_threshold_ns __ro_after_init;
+
+static int __init irqhandler_duration_check_setup(char *arg)
+{
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(arg, 0, &val);
+	if (ret) {
+		pr_err("Unable to parse irqhandler.duration_warn_us setting: ret=%d\n", ret);
+		return 0;
+	}
+
+	if (!val) {
+		pr_err("Invalid irqhandler.duration_warn_us setting, must be > 0\n");
+		return 0;
+	}
+
+	irqhandler_duration_threshold_ns = val * 1000;
+	static_branch_enable(&irqhandler_duration_check_enabled);
+
+	return 1;
+}
+__setup("irqhandler.duration_warn_us=", irqhandler_duration_check_setup);
+
+static inline void irqhandler_duration_check(u64 ts_start, unsigned int irq,
+					     const struct irqaction *action)
+{
+	u64 delta_ns = local_clock() - ts_start;
+
+	if (unlikely(delta_ns > irqhandler_duration_threshold_ns)) {
+		pr_warn_ratelimited("[CPU%u] long duration of IRQ[%u:%ps], took: %llu us\n",
+				    smp_processor_id(), irq, action->handler,
+				    div_u64(delta_ns, NSEC_PER_USEC));
+	}
+}
+
 irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc)
 {
 	irqreturn_t retval = IRQ_NONE;
@@ -155,7 +193,16 @@ irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc)
 			lockdep_hardirq_threaded();
 
 		trace_irq_handler_entry(irq, action);
-		res = action->handler(irq, action->dev_id);
+
+		if (static_branch_unlikely(&irqhandler_duration_check_enabled)) {
+			u64 ts_start = local_clock();
+
+			res = action->handler(irq, action->dev_id);
+			irqhandler_duration_check(ts_start, irq, action);
+		} else {
+			res = action->handler(irq, action->dev_id);
+		}
+
 		trace_irq_handler_exit(irq, action, res);
 
 		if (WARN_ONCE(!irqs_disabled(),"irq %u handler %pS enabled interrupts\n",

      parent reply	other threads:[~2025-09-03 14:13 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-04  9:35 [PATCH v5] genirq: add support for warning on long-running IRQ handlers Wladislav Wiebe
2025-08-04 11:00 ` Jiri Slaby
2025-08-07  5:15 ` Jiri Slaby
2025-09-03 14:13 ` tip-bot2 for Wladislav Wiebe [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=175690878044.1920.10260472737445670133.tip-bot2@tip-bot2 \
    --to=tip-bot2@linutronix.de \
    --cc=jirislaby@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=wladislav.wiebe@nokia.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®