From: "Rob Herring (Arm)" <robh@kernel.org>
To: Ravi Patel <ravi.patel@samsung.com>
Cc: gwk1013@coasia.com, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org,
sboyd@kernel.org, krzk+dt@kernel.org, s.nawrocki@samsung.com,
shradha.t@samsung.com, swathi.ks@samsung.com, kenkim@coasia.com,
linux-kernel@vger.kernel.org, lars.persson@axis.com,
devicetree@vger.kernel.org, jspark@coasia.com,
cw00.choi@samsung.com, bread@coasia.com, ksk4725@coasia.com,
linux-samsung-soc@vger.kernel.org, linux-arm-kernel@axis.com,
krzk@kernel.org, mingyoungbo@coasia.com, limjh0823@coasia.com,
pjsin865@coasia.com, smn1196@coasia.com, lightwise@coasia.com,
alim.akhtar@samsung.com, hgkim05@coasia.com,
mturquette@baylibre.com, jesper.nilsson@axis.com
Subject: Re: [PATCH 0/7] Add support for the Axis ARTPEC-9 SoC
Date: Wed, 17 Sep 2025 19:39:30 -0500 [thread overview]
Message-ID: <175815587241.3804330.15494043939076166560.robh@kernel.org> (raw)
In-Reply-To: <20250917085005.89819-1-ravi.patel@samsung.com>
On Wed, 17 Sep 2025 14:19:57 +0530, Ravi Patel wrote:
> Add basic support for the Axis ARTPEC-9 SoC which contains
> 6-core Cortex-A55 CPU and other several IPs. This SoC is an
> Axis-designed chipset used in surveillance camera products.
>
> This ARTPEC-9 SoC has a variety of Samsung-specific IP blocks and
> Axis-specific IP blocks and SoC is manufactured by Samsung Foundry.
>
> This patch series includes below changes:
> - CMU (Clock Management Unit) driver and its bindings (patch #1 to #3)
> - PMU bindings (patch #4)
> - Basic Device Tree for ARTPEC-9 SoC and boards (patch #5 to #7)
>
> The patch series has been tested on the ARTPEC-9 EVB with
> Linux Samsung SoC tree (for-next branch) and intended
> to be merged via the `arm-soc` tree.
>
> NOTE: This patch series is dependent on following floating patches:
> 1. https://lore.kernel.org/all/20250917070004.87872-1-ravi.patel@samsung.com/T/#t
> 2. https://lore.kernel.org/all/20250917071342.5637-1-ravi.patel@samsung.com/T/#u
> 3. https://lore.kernel.org/all/20250917071311.1404-1-ravi.patel@samsung.com/T/#u
>
> GyoungBo Min (3):
> dt-bindings: clock: Add ARTPEC-9 clock controller
> clk: samsung: Add clock PLL support for ARTPEC-9 SoC
> clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
>
> Ravi Patel (2):
> dt-bindings: arm: axis: Add ARTPEC-9 alfred board
> arm64: dts: axis: Add ARTPEC-9 Alfred board support
>
> SungMin Park (2):
> dt-bindings: samsung: exynos-pmu: Add compatible for ARTPEC-9 SoC
> arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
>
> .../devicetree/bindings/arm/axis.yaml | 6 +
> .../bindings/clock/axis,artpec9-clock.yaml | 232 ++++
> .../bindings/soc/samsung/exynos-pmu.yaml | 1 +
> arch/arm64/boot/dts/exynos/axis/Makefile | 3 +-
> .../boot/dts/exynos/axis/artpec9-alfred.dts | 36 +
> .../boot/dts/exynos/axis/artpec9-pinctrl.dtsi | 115 ++
> arch/arm64/boot/dts/exynos/axis/artpec9.dtsi | 277 ++++
> drivers/clk/samsung/Makefile | 1 +
> drivers/clk/samsung/clk-artpec9.c | 1224 +++++++++++++++++
> drivers/clk/samsung/clk-pll.c | 184 ++-
> drivers/clk/samsung/clk-pll.h | 17 +
> include/dt-bindings/clock/axis,artpec9-clk.h | 195 +++
> 12 files changed, 2282 insertions(+), 9 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/axis,artpec9-clock.yaml
> create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dts
> create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec9-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec9.dtsi
> create mode 100644 drivers/clk/samsung/clk-artpec9.c
> create mode 100644 include/dt-bindings/clock/axis,artpec9-clk.h
>
> --
> 2.17.1
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250917 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/exynos/' for 20250917085005.89819-1-ravi.patel@samsung.com:
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: timer@10040000 (axis,artpec9-mct): compatible: 'oneOf' conditional failed, one must be fixed:
['axis,artpec9-mct', 'samsung,exynos4210-mct'] is too long
'axis,artpec9-mct' is not one of ['samsung,exynos4210-mct', 'samsung,exynos4412-mct']
'axis,artpec9-mct' is not one of ['axis,artpec8-mct', 'google,gs101-mct', 'samsung,exynos2200-mct-peris', 'samsung,exynos3250-mct', 'samsung,exynos5250-mct', 'samsung,exynos5260-mct', 'samsung,exynos5420-mct', 'samsung,exynos5433-mct', 'samsung,exynos850-mct', 'samsung,exynos8895-mct', 'samsung,exynos990-mct', 'tesla,fsd-mct']
from schema $id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: /soc/timer@10040000: failed to match any schema with compatible: ['axis,artpec9-mct', 'samsung,exynos4210-mct']
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: /soc/pinctrl@141f0000: failed to match any schema with compatible: ['axis,artpec9-pinctrl']
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: /soc/pinctrl@14430000: failed to match any schema with compatible: ['axis,artpec9-pinctrl']
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: /soc/pinctrl@14c30000: failed to match any schema with compatible: ['axis,artpec9-pinctrl']
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: serial@14c70000 (axis,artpec9-uart): compatible: 'oneOf' conditional failed, one must be fixed:
['axis,artpec9-uart', 'samsung,exynos8895-uart'] is too long
'axis,artpec9-uart' is not one of ['apple,s5l-uart', 'axis,artpec8-uart', 'google,gs101-uart', 'samsung,s3c6400-uart', 'samsung,s5pv210-uart', 'samsung,exynos4210-uart', 'samsung,exynos5433-uart', 'samsung,exynos850-uart', 'samsung,exynos8895-uart']
'axis,artpec9-uart' is not one of ['samsung,exynos2200-uart']
'axis,artpec9-uart' is not one of ['samsung,exynos7-uart', 'tesla,fsd-uart']
'axis,artpec9-uart' is not one of ['samsung,exynos7885-uart']
'axis,artpec9-uart' is not one of ['samsung,exynosautov9-uart', 'samsung,exynosautov920-uart']
'axis,artpec9-uart' is not one of ['samsung,exynos7870-uart']
'google,gs101-uart' was expected
'samsung,exynos4210-uart' was expected
'samsung,exynos5433-uart' was expected
'samsung,exynos850-uart' was expected
from schema $id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
arch/arm64/boot/dts/exynos/axis/artpec9-alfred.dtb: /soc/serial@14c70000: failed to match any schema with compatible: ['axis,artpec9-uart', 'samsung,exynos8895-uart']
next prev parent reply other threads:[~2025-09-18 0:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20250917085019epcas5p273ef86028a90e78ada55cde48a28a949@epcas5p2.samsung.com>
2025-09-17 8:49 ` Ravi Patel
[not found] ` <CGME20250917085025epcas5p229b9eba48bd93a1f059b3cc4656145bc@epcas5p2.samsung.com>
2025-09-17 8:49 ` [PATCH 1/7] dt-bindings: clock: Add ARTPEC-9 clock controller Ravi Patel
2025-09-22 16:53 ` Rob Herring (Arm)
[not found] ` <CGME20250917085030epcas5p37cfe7031a7355d4336def6e15d8e62ee@epcas5p3.samsung.com>
2025-09-17 8:49 ` [PATCH 2/7] clk: samsung: Add clock PLL support for ARTPEC-9 SoC Ravi Patel
2025-09-18 11:51 ` kernel test robot
[not found] ` <CGME20250917085036epcas5p43a0dc30d128993a96ddd9268c7b35c78@epcas5p4.samsung.com>
2025-09-17 8:50 ` [PATCH 3/7] clk: samsung: artpec-9: Add initial clock " Ravi Patel
[not found] ` <CGME20250917085040epcas5p1fa7cba6f9425f534c9eca976c4bcd4c6@epcas5p1.samsung.com>
2025-09-17 8:50 ` [PATCH 4/7] dt-bindings: samsung: exynos-pmu: Add compatible " Ravi Patel
2025-09-17 19:21 ` Conor Dooley
[not found] ` <CGME20250917085045epcas5p2905ed7f307ca892997e14c33ad68f9fa@epcas5p2.samsung.com>
2025-09-17 8:50 ` [PATCH 5/7] dt-bindings: arm: axis: Add ARTPEC-9 alfred board Ravi Patel
2025-09-17 19:20 ` Conor Dooley
[not found] ` <CGME20250917085050epcas5p1f557a40a3826294b17b5714e89518638@epcas5p1.samsung.com>
2025-09-17 8:50 ` [PATCH 6/7] arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support Ravi Patel
[not found] ` <CGME20250917085055epcas5p18e688864c8e9fd788f8073510ae0d0b3@epcas5p1.samsung.com>
2025-09-17 8:50 ` [PATCH 7/7] arm64: dts: axis: Add ARTPEC-9 Alfred board support Ravi Patel
2025-09-18 0:39 ` Rob Herring (Arm) [this message]
2025-09-18 1:05 ` [PATCH 0/7] Add support for the Axis ARTPEC-9 SoC Krzysztof Kozlowski
2025-09-18 3:36 ` Ravi Patel
2025-09-18 8:18 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=175815587241.3804330.15494043939076166560.robh@kernel.org \
--to=robh@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=bread@coasia.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=gwk1013@coasia.com \
--cc=hgkim05@coasia.com \
--cc=jesper.nilsson@axis.com \
--cc=jspark@coasia.com \
--cc=kenkim@coasia.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=ksk4725@coasia.com \
--cc=lars.persson@axis.com \
--cc=lightwise@coasia.com \
--cc=limjh0823@coasia.com \
--cc=linux-arm-kernel@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mingyoungbo@coasia.com \
--cc=mturquette@baylibre.com \
--cc=pjsin865@coasia.com \
--cc=ravi.patel@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=shradha.t@samsung.com \
--cc=smn1196@coasia.com \
--cc=swathi.ks@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®