[PATCH net-next 0/5] net/mlx5: Add balance ID support for LAG multiplane groups

[Tariq Toukan <tariqt@nvidia.com>]

Hi,

This series adds balance ID support for MLX5 LAG in multiplane
configurations.

See detailed description by Mark below [1].

Regards,
Tariq


[1]
The problem: In complex multiplane LAG setups, we need finer control over LAG
groups. Currently, devices with the same system image GUID are treated
identically, but hardware now supports per-multiplane-group balance IDs that
let us differentiate between them. On such systems image system guid
isn't enough to decide which devices should be part of which LAG.

The solution: Extend the system image GUID with a balance ID byte when the
hardware supports it. This gives us the granularity we need without breaking
existing deployments.

What this series does:

1. Add the hardware interface bits (load_balance_id and lag_per_mp_group)
2. Clean up some duplicate code while we're here
3. Rework the system image GUID infrastructure to handle variable lengths
4. Update PTP clock pairing to use the new approach
5. Restructure capability setting to make room for the new feature
6. Actually implement the balance ID support

The key insight is in patch 6: we only append the balance ID when both
capabilities are present, so older hardware and software continue to work
exactly as before. For newer setups, you get the extra byte that enables
per-multiplane-group load balancing.

This has been tested with both old and new hardware configurations.


Mark Bloch (5):
  net/mlx5: Use common mlx5_same_hw_devs function
  net/mlx5: Add software system image GUID infrastructure
  net/mlx5: Refactor PTP clock devcom pairing
  net/mlx5: Refactor HCA cap 2 setting
  net/mlx5: Add balance ID support for LAG multiplane groups

 drivers/net/ethernet/mellanox/mlx5/core/dev.c | 12 ++++---
 .../ethernet/mellanox/mlx5/core/en/devlink.c  |  7 ++--
 .../ethernet/mellanox/mlx5/core/en/mapping.c  | 13 +++++---
 .../ethernet/mellanox/mlx5/core/en/mapping.h  |  3 +-
 .../mellanox/mlx5/core/en/rep/bridge.c        |  6 +---
 .../mellanox/mlx5/core/en/tc/int_port.c       |  8 +++--
 .../ethernet/mellanox/mlx5/core/en/tc_ct.c    | 11 ++++---
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 32 ++++++++++---------
 .../mellanox/mlx5/core/esw/devlink_port.c     |  6 +---
 .../mellanox/mlx5/core/eswitch_offloads.c     |  8 +++--
 .../net/ethernet/mellanox/mlx5/core/lag/lag.c |  4 ++-
 .../ethernet/mellanox/mlx5/core/lib/clock.c   | 19 ++++++-----
 .../ethernet/mellanox/mlx5/core/lib/devcom.h  |  2 ++
 .../net/ethernet/mellanox/mlx5/core/main.c    | 23 +++++++++----
 .../ethernet/mellanox/mlx5/core/mlx5_core.h   |  2 ++
 .../net/ethernet/mellanox/mlx5/core/vport.c   | 19 +++++++++++
 include/linux/mlx5/driver.h                   |  3 ++
 17 files changed, 112 insertions(+), 66 deletions(-)


base-commit: d550d63d0082268a31e93a10c64cbc2476b98b24
-- 
2.31.1