From: patchwork-bot+bluetooth@kernel.org
To: Max Chou <max.chou@realtek.com>
Cc: marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
hildawu@realtek.com, alex_lu@realsil.com.cn,
niall_ni@realsil.com.cn, zhu_qing@realsil.com.cn,
wangchihhs@realtek.com, brenda.li@ublnx.com
Subject: Re: [PATCH v2] Bluetooth: btrtl: Add the support for RTL8761CUV
Date: Tue, 28 Oct 2025 21:30:06 +0000 [thread overview]
Message-ID: <176168700626.2391991.1018861580284993450.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20251028062413.252504-1-max.chou@realtek.com>
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Tue, 28 Oct 2025 14:24:13 +0800 you wrote:
> Add support for RTL8761CUV BT controller on the USB interface.
> Do not apply IC_MATCH_FL_HCIVER when hci_ver is 0 in the ic_id_table.
>
> The device info from /sys/kernel/debug/usb/devices as below.
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=c761 Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Controller
> S: SerialNumber=10000
> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
>
> [...]
Here is the summary with links:
- [v2] Bluetooth: btrtl: Add the support for RTL8761CUV
https://git.kernel.org/bluetooth/bluetooth-next/c/ab8cafa86951
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
prev parent reply other threads:[~2025-10-28 21:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-28 6:24 Max Chou
2025-10-28 21:30 ` patchwork-bot+bluetooth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=176168700626.2391991.1018861580284993450.git-patchwork-notify@kernel.org \
--to=patchwork-bot+bluetooth@kernel.org \
--cc=alex_lu@realsil.com.cn \
--cc=brenda.li@ublnx.com \
--cc=hildawu@realtek.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=max.chou@realtek.com \
--cc=niall_ni@realsil.com.cn \
--cc=wangchihhs@realtek.com \
--cc=zhu_qing@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®