From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161550AbWHDWnZ (ORCPT ); Fri, 4 Aug 2006 18:43:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1161552AbWHDWnZ (ORCPT ); Fri, 4 Aug 2006 18:43:25 -0400 Received: from palrel12.hp.com ([156.153.255.237]:17388 "EHLO palrel12.hp.com") by vger.kernel.org with ESMTP id S1161550AbWHDWnY (ORCPT ); Fri, 4 Aug 2006 18:43:24 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <17619.52619.386906.60775@cello.hpl.hp.com> Date: Fri, 4 Aug 2006 15:43:23 -0700 From: Eric Anderson To: linux-kernel@vger.kernel.org Subject: result of pci=assign-busses on HP NW9440 laptop X-Mailer: VM 7.15 under Emacs 20.7.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org dmesg on booting a 2.6.17.7 kernel on the HP NW9440 laptop reports: > PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') > Please report the result to linux-kernel to fix this permanently I'm not quite sure which part of the dmesg output I'm supposed to report. When I enable pci=assign-busses, the piece of dmesg that reports the warning says nothing, but later on in dmesg where it is printing out information about busses, it says: > PCI: Bus 6, cardbus bridge: 0000:05:06.0 > IO window: 00006000-000060ff > IO window: 00006400-000064ff > PREFETCH window: 88000000-89ffffff > MEM window: 8a000000-8bffffff Instead of PCI: Bus 3, ... I didn't notice anything else changing. If I should run some other command or provide other output, tell me what to run and I'll report the output. Please CC me directly since I'm not subscribed to linux-kernel. -Eric