From: "Rob Herring (Arm)" <robh@kernel.org>
To: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Cc: devicetree@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Robin Gong <yibin.gong@nxp.com>
Subject: Re: [PATCH 1/2] dt-bindings: regulator: pca9540: add debounce timer configuration
Date: Wed, 12 Nov 2025 07:35:39 -0600 [thread overview]
Message-ID: <176295453963.1617799.11924741308480396991.robh@kernel.org> (raw)
In-Reply-To: <20251112121710.2623143-1-martijn.de.gouw@prodrive-technologies.com>
On Wed, 12 Nov 2025 13:17:08 +0100, Martijn de Gouw wrote:
> Make the different debounce timers configurable from the devicetree.
> Depending on the board design, these have to be set different than the
> default register values.
>
> Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
> ---
> .../regulator/nxp,pca9450-regulator.yaml | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:nxp,pmic_on_req-on-debounce-us: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:nxp,pmic_on_req-off-debounce-us: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:nxp,power-on-step-ms: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:nxp,power-down-step-ms: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:nxp,restart-ms: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml: properties:npx,pmic_rst_b-debounce-ms: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251112121710.2623143-1-martijn.de.gouw@prodrive-technologies.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
next prev parent reply other threads:[~2025-11-12 13:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-12 12:17 Martijn de Gouw
2025-11-12 12:17 ` [PATCH 2/2] regulator: pca9450: Add support for setting debounce settings Martijn de Gouw
2025-11-12 13:35 ` Rob Herring (Arm) [this message]
2025-11-12 18:51 ` [PATCH 1/2] dt-bindings: regulator: pca9540: add debounce timer configuration Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=176295453963.1617799.11924741308480396991.robh@kernel.org \
--to=robh@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martijn.de.gouw@prodrive-technologies.com \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®