Re: [PATCH v19 1/6] dt-bindings: pwm: add IPQ6018 binding

["Rob Herring (Arm)" <robh@kernel.org>]

On Fri, 28 Nov 2025 14:29:13 +0400, George Moussalem wrote:
> From: Devi Priya <quic_devipriy@quicinc.com>
> 
> DT binding for the PWM block in Qualcomm IPQ6018 SoC.
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
> Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---
>  .../devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml  | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128-ipq-pwm-v19-1-13bc704cc6a5@outlook.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.