Re: [PATCH] dt-bindings: interconnect: qcom,sa8775p-rpmh: Fix incorrectly added reg and clocks

["Rob Herring (Arm)" <robh@kernel.org>]

On Sat, 29 Nov 2025 10:46:13 +0100, Krzysztof Kozlowski wrote:
> Commit 8a55fbe4c94d ("dt-bindings: interconnect: add reg and clocks
> properties to enable QoS on sa8775p") claims that all interconnects have
> clocks and MMIO address space, but that is just not true.  Only few
> have.  Bindings should restrict properties and should not allow
> specifying non-existing hardware description, so fix missing constraints
> for 'reg' and 'clocks'.
> 
> Fixes: 8a55fbe4c94d ("dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
>  .../interconnect/qcom,sa8775p-rpmh.yaml       | 31 +++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251129094612.16838-2-krzysztof.kozlowski@oss.qualcomm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.