From: Rob Herring <robh@kernel.org>
To: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
Cc: devicetree@vger.kernel.org,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
linux-kernel@vger.kernel.org, Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Subject: Re: [PATCH v2 0/2] arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch nodes
Date: Tue, 03 Feb 2026 11:37:25 -0600 [thread overview]
Message-ID: <177014003005.3173393.12199937137009743823.robh@kernel.org> (raw)
In-Reply-To: <20260203-industrial-mezzanine-pcie-v2-0-8579ed6bf931@oss.qualcomm.com>
On Tue, 03 Feb 2026 10:01:27 +0530, Sushrut Shree Trivedi wrote:
> Add nodes for the two additional TC9563 PCIe switches present on the
> QCOM RB3Gen2 Industrial Mezzanine platform.
>
> One of the TC9563 is connected directly to the PCIe0 root-port while
> the second TC9563 switch is connected in cascade fashion to another
> already available TC9563 switch on PCIe1 via the former's downstream
> port (DSP). The final PCIe hierarchy on the Industrial Mezz platform
> would look something like below:
>
> ┌────────────────────────────┐
> │ │
> │ │
> │ │
> │ SoC │
> │ │
> │ PCIe0 PCIe1 │
> │ ┌───┐ ┌───┐ │
> └────└─┬─┘───────────└─┬─┘───┘
> │ │
> │ │
> │ │
> ┌────────────────┘ └────────────────┐
> │ │
> │ │
> │ │
> ┌────────┴─────────┐ ┌──────────┴───────┐
> │ USP │ │ USP │
> │ │ │ │
> │ TC9563 │ │ TC9563 │
> │ │ │ │
> │ │ │ │
> │ DSP1 DSP2 DSP3 │ │ DSP1 DSP2 DSP3 │
> └──┬──────┬─────┬──┘ └───┬─────┬─────┬──┘
> │ │ │ │ │ │
> │ │ │ │ │ │
> │ │ │ │ │ │
> │ │ │ │ EP ETHERNET
> │ │ │ │
> │ │ │ └──────┐
> EP EP ETHERNET │
> │
> │
> ┌─────────┴────────┐
> │ USP │
> │ │
> │ TC9563 │
> │ │
> │ │
> │ DSP1 DSP2 DSP3 │
> └──┬──────┬─────┬──┘
> │ │ │
> │ │ │
> │ │ │
> │ │ │
> │ │ │
> EP EP ETHERNET
>
>
>
> Signed-off-by: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
> ---
> Changes in v2:
> - EDITME: describe what is new in this series revision.
> - EDITME: use bulletpoints and terse descriptions.
> - Link to v1: https://lore.kernel.org/r/20260131-industrial-mezzanine-pcie-v1-0-b3c2905dd768@oss.qualcomm.com
>
> ---
> Sushrut Shree Trivedi (2):
> arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch node for PCIe0
> arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add second TC9563 PCIe switch node for PCIe1
>
> .../qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso | 234 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 +-
> 2 files changed, 240 insertions(+), 6 deletions(-)
> ---
> base-commit: 4f938c7d3b25d87b356af4106c2682caf8c835a2
> change-id: 20260131-industrial-mezzanine-pcie-75dd851f5b04
>
> Best regards,
> --
> Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
>
>
>
My bot found DTB warnings on the .dts/.dtsi files added or changed in
this series.
Some warnings may be existing warnings. Consider fixing existing
warnings before adding new features.
Perhaps the warnings are fixed by another series. If that is the case,
please set the base commit and any dependencies for the series using
"b4".
Ultimately, it is up to the platform maintainer whether these warnings
are acceptable or not.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: 4f938c7d3b25d87b356af4106c2682caf8c835a2 (use --merge-base to override)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20260203-industrial-mezzanine-pcie-v2-0-8579ed6bf931@oss.qualcomm.com:
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:86.3-35: Warning (reg_format): /fragment@4/__overlay__/pcie@0,0:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:171.3-35: Warning (reg_format): /fragment@6/__overlay__/pcie@0,0:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:91.3-10: Warning (ranges_format): /fragment@4/__overlay__/pcie@0,0:ranges: empty "ranges" property but its #address-cells (3) differs from /fragment@4/__overlay__ (2)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:91.3-10: Warning (ranges_format): /fragment@4/__overlay__/pcie@0,0:ranges: empty "ranges" property but its #size-cells (2) differs from /fragment@4/__overlay__ (1)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:176.3-10: Warning (ranges_format): /fragment@6/__overlay__/pcie@0,0:ranges: empty "ranges" property but its #address-cells (3) differs from /fragment@6/__overlay__ (2)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:176.3-10: Warning (ranges_format): /fragment@6/__overlay__/pcie@0,0:ranges: empty "ranges" property but its #size-cells (2) differs from /fragment@6/__overlay__ (1)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:84.30-146.4: Warning (avoid_default_addr_size): /fragment@4/__overlay__/pcie@0,0: Relying on default #address-cells value
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:84.30-146.4: Warning (avoid_default_addr_size): /fragment@4/__overlay__/pcie@0,0: Relying on default #size-cells value
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:169.30-231.4: Warning (avoid_default_addr_size): /fragment@6/__overlay__/pcie@0,0: Relying on default #address-cells value
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso:169.30-231.4: Warning (avoid_default_addr_size): /fragment@6/__overlay__/pcie@0,0: Relying on default #size-cells value
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pmic@2 (qcom,pm8350c): pwm:nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pwm (qcom,pm8350c-pwm): nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0:pci@0,1: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0:pci@0,0: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'pci@0,0', 'pci@0,1', 'ranges', 'reg' were unexpected)
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@3,0: pci@0,1: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@3,0: pci@0,0: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0:pci@0,1: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0:pci@0,0: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@0,0 (pci1179,0623): pcie@3,0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'pci@0,0', 'pci@0,1', 'ranges', 'reg' were unexpected)
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@3,0: pci@0,1: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pcie@3,0: pci@0,0: 'reg' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pmic@2 (qcom,pm8350c): pwm:nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtb: pwm (qcom,pm8350c-pwm): nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtb: pmic@2 (qcom,pm8350c): pwm:nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtb: pwm (qcom,pm8350c-pwm): nvmem: [[390, 391]] is too short
from schema $id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml
next prev parent reply other threads:[~2026-02-03 17:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-03 4:31 Sushrut Shree Trivedi
2026-02-03 4:31 ` [PATCH v2 1/2] arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch node for PCIe0 Sushrut Shree Trivedi
2026-02-03 9:22 ` Konrad Dybcio
2026-02-03 18:07 ` Dmitry Baryshkov
2026-02-03 4:31 ` [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add second TC9563 PCIe switch node for PCIe1 Sushrut Shree Trivedi
2026-02-03 9:21 ` Konrad Dybcio
2026-02-03 4:37 ` [PATCH v2 0/2] arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch nodes Sushrut Shree Trivedi
2026-02-03 8:48 ` Konrad Dybcio
2026-02-03 17:37 ` Rob Herring [this message]
2026-02-03 18:06 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=177014003005.3173393.12199937137009743823.robh@kernel.org \
--to=robh@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sushrut.trivedi@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®