Re: [PATCH 1/3] dt-bindings: power: Add power-domains-child-ids property

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 10 Mar 2026 17:19:23 -0700, Kevin Hilman (TI) wrote:
> Add binding documentation for the new power-domains-child-ids property,
> which works in conjunction with the existing power-domains property to
> establish parent-child relationships between a multi-domain power domain
> provider and external parent domains.
> 
> Each element in the uint32 array identifies the child domain
> ID (index) within the provider that should be made a child domain of
> the corresponding phandle entry in power-domains. The two arrays must
> have the same number of elements.
> 
> Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
> ---
>  Documentation/devicetree/bindings/power/power-domain.yaml | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/power/power-domain.example.dts:136.13-26: Warning (reg_format): /example-3/protocol@11:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/power/power-domain.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/power/power-domain.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/power/power-domain.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/power/power-domain.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/power/power-domain.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260310-topic-lpm-pmdomain-child-ids-v1-1-5361687a18ff@baylibre.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.