mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Mackerras <paulus@samba.org>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org, akpm@osdl.org
Subject: [PATCH] powerpc: Eliminate "exceeds stub group size" linker warning
Date: Wed, 1 Nov 2006 12:01:16 +1100	[thread overview]
Message-ID: <17735.61916.194247.973705@cargo.ozlabs.ibm.com> (raw)

It turns out that the linker warnings on 64-bit powerpc about "section
blah exceeds stub group size" were being triggered by conditional
branches in head_64.S branching to global symbols, whether in
head_64.S or in other files.  This eliminates the warnings by making
some global symbols in head_64.S no longer global, and by rearranging
some branches.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
Linus,

If you think this is 2.6.19 material, feel free to put it in your
tree.  Otherwise I'll put it in the powerpc.git tree to go in for
2.6.20.

Paul.

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 47fcff1..c005f15 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -505,7 +505,7 @@ BEGIN_FTR_SECTION
 	rlwimi	r13,r12,16,0x20
 	mfcr	r12
 	cmpwi	r13,0x2c
-	beq	.do_stab_bolted_pSeries
+	beq	do_stab_bolted_pSeries
 	mtcrf	0x80,r12
 	mfspr	r12,SPRN_SPRG2
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
@@ -635,7 +635,7 @@ masked_interrupt:
 	b	.
 
 	.align	7
-_GLOBAL(do_stab_bolted_pSeries)
+do_stab_bolted_pSeries:
 	mtcrf	0x80,r12
 	mfspr	r12,SPRN_SPRG2
 	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
@@ -1090,7 +1090,7 @@ slb_miss_fault:
 	li	r5,0
 	std	r4,_DAR(r1)
 	std	r5,_DSISR(r1)
-	b	.handle_page_fault
+	b	handle_page_fault
 
 unrecov_user_slb:
 	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
@@ -1218,12 +1218,13 @@ program_check_common:
 	.globl fp_unavailable_common
 fp_unavailable_common:
 	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
-	bne	.load_up_fpu		/* if from user, just load it up */
+	bne	1f			/* if from user, just load it up */
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	ENABLE_INTS
 	bl	.kernel_fp_unavailable_exception
 	BUG_OPCODE
+1:	b	.load_up_fpu
 
 	.align	7
 	.globl altivec_unavailable_common
@@ -1323,10 +1324,10 @@ _GLOBAL(do_hash_page)
 	std	r4,_DSISR(r1)
 
 	andis.	r0,r4,0xa450		/* weird error? */
-	bne-	.handle_page_fault	/* if not, try to insert a HPTE */
+	bne-	handle_page_fault	/* if not, try to insert a HPTE */
 BEGIN_FTR_SECTION
 	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
-	bne-	.do_ste_alloc		/* If so handle it */
+	bne-	do_ste_alloc		/* If so handle it */
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
 	/*
@@ -1368,7 +1369,7 @@ BEGIN_FW_FTR_SECTION
 	 * because ret_from_except_lite will check for and handle pending
 	 * interrupts if necessary.
 	 */
-	beq	.ret_from_except_lite
+	beq	14f
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
 BEGIN_FW_FTR_SECTION
@@ -1390,16 +1391,17 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISER
 	ld	r3,SOFTE(r1)
 	bl	.local_irq_restore
 	b	11f
+14:	b	.ret_from_except_lite
 
 /* Here we have a page fault that hash_page can't handle. */
-_GLOBAL(handle_page_fault)
+handle_page_fault:
 	ENABLE_INTS
 11:	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_page_fault
 	cmpdi	r3,0
-	beq+	.ret_from_except_lite
+	beq+	14b
 	bl	.save_nvgprs
 	mr	r5,r3
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -1417,11 +1419,11 @@ _GLOBAL(handle_page_fault)
 	b	.ret_from_except
 
 	/* here we have a segment miss */
-_GLOBAL(do_ste_alloc)
+do_ste_alloc:
 	bl	.ste_allocate		/* try to insert stab entry */
 	cmpdi	r3,0
-	beq+	fast_exception_return
-	b	.handle_page_fault
+	bne-	handle_page_fault
+	b	fast_exception_return
 
 /*
  * r13 points to the PACA, r9 contains the saved CR,

             reply	other threads:[~2006-11-01  1:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-01  1:01 Paul Mackerras [this message]
2006-11-01 14:50 ` Linus Torvalds
2006-11-01 22:43   ` Paul Mackerras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17735.61916.194247.973705@cargo.ozlabs.ibm.com \
    --to=paulus@samba.org \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®