Re: [PATCH V7 3/9] mmc: sdhci: Change SDMA address register for v4 mode

[Adrian Hunter <adrian.hunter@intel.com>]

On 29/08/18 10:02, Chunyan Zhang wrote:
> According to the SD host controller specification version 4.10, when
> Host Version 4 is enabled, SDMA uses ADMA System Address register
> (05Fh-058h) instead of using SDMA System Address register to
> support both 32-bit and 64-bit addressing.
> 
> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci.c | 30 ++++++++++++++++++++----------
>  1 file changed, 20 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 0c61105..6fb70da 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -727,7 +727,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
>  	}
>  }
>  
> -static u32 sdhci_sdma_address(struct sdhci_host *host)
> +static dma_addr_t sdhci_sdma_address(struct sdhci_host *host)
>  {
>  	if (host->bounce_buffer)
>  		return host->bounce_addr;
> @@ -735,6 +735,17 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)
>  		return sg_dma_address(host->data->sg);
>  }
>  
> +static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)
> +{
> +	if (host->v4_mode) {
> +		sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);
> +		if (host->flags & SDHCI_USE_64_BIT_DMA)
> +			sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA_ADDRESS_HI);
> +	} else {
> +		sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);
> +	}
> +}
> +
>  static unsigned int sdhci_target_timeout(struct sdhci_host *host,
>  					 struct mmc_command *cmd,
>  					 struct mmc_data *data)
> @@ -994,8 +1005,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>  					     SDHCI_ADMA_ADDRESS_HI);
>  		} else {
>  			WARN_ON(sg_cnt != 1);
> -			sdhci_writel(host, sdhci_sdma_address(host),
> -				     SDHCI_DMA_ADDRESS);
> +			sdhci_set_sdma_addr(host, sdhci_sdma_address(host));
>  		}
>  	}
>  
> @@ -2830,7 +2840,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  		 * some controllers are faulty, don't trust them.
>  		 */
>  		if (intmask & SDHCI_INT_DMA_END) {
> -			u32 dmastart, dmanow;
> +			dma_addr_t dmastart, dmanow;
>  
>  			dmastart = sdhci_sdma_address(host);
>  			dmanow = dmastart + host->data->bytes_xfered;
> @@ -2838,12 +2848,12 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  			 * Force update to the next DMA block boundary.
>  			 */
>  			dmanow = (dmanow &
> -				~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
> +				~((dma_addr_t)SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
>  				SDHCI_DEFAULT_BOUNDARY_SIZE;
>  			host->data->bytes_xfered = dmanow - dmastart;
> -			DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
> -			    dmastart, host->data->bytes_xfered, dmanow);
> -			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
> +			DBG("DMA base %pad, transferred 0x%06x bytes, next %pad\n",
> +			    &dmastart, host->data->bytes_xfered, &dmanow);
> +			sdhci_set_sdma_addr(host, dmanow);
>  		}
>  
>  		if (intmask & SDHCI_INT_DATA_END) {
> @@ -3590,8 +3600,8 @@ int sdhci_setup_host(struct sdhci_host *host)
>  		}
>  	}
>  
> -	/* SDMA does not support 64-bit DMA */
> -	if (host->flags & SDHCI_USE_64_BIT_DMA)
> +	/* SDMA does not support 64-bit DMA if v4 mode not set */
> +	if ((host->flags & SDHCI_USE_64_BIT_DMA) && !host->v4_mode)
>  		host->flags &= ~SDHCI_USE_SDMA;
>  
>  	if (host->flags & SDHCI_USE_ADMA) {
>