From: "tip-bot2 for Markus Stockhausen" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Markus Stockhausen <markus.stockhausen@gmx.de>,
Thomas Gleixner <tglx@kernel.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: irq/drivers] irqchip/irq-realtek-rtl: Add interrupt data structure
Date: Mon, 29 Jun 2026 15:19:51 -0000 [thread overview]
Message-ID: <178274639167.3843924.17339598138811147227.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20260605211646.2101652-4-markus.stockhausen@gmx.de>
The following commit has been merged into the irq/drivers branch of tip:
Commit-ID: 2568f6926c667e0b4ecf523cb4015acefc40409a
Gitweb: https://git.kernel.org/tip/2568f6926c667e0b4ecf523cb4015acefc40409a
Author: Markus Stockhausen <markus.stockhausen@gmx.de>
AuthorDate: Fri, 05 Jun 2026 23:16:42 +02:00
Committer: Thomas Gleixner <tglx@kernel.org>
CommitterDate: Mon, 29 Jun 2026 17:19:06 +02:00
irqchip/irq-realtek-rtl: Add interrupt data structure
To prepare for multiple parent interrupt domains add an intermediate
data structure. For now this will only host the link to the domain.
Additionally adapt a deviating variable name to driver standard "hw_irq".
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260605211646.2101652-4-markus.stockhausen@gmx.de
---
drivers/irqchip/irq-realtek-rtl.c | 48 +++++++++++++++++++++---------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index 3b4508e..547f21d 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -25,6 +25,10 @@
#define REG(cpu, x) (realtek_ictl_base[cpu] + x)
+struct realtek_ictl_output {
+ struct irq_domain *domain;
+};
+
static DEFINE_RAW_SPINLOCK(irq_lock);
static void __iomem *realtek_ictl_base[NR_CPUS];
@@ -125,11 +129,11 @@ static const struct irq_domain_ops irq_domain_ops = {
static void realtek_irq_dispatch(struct irq_desc *desc)
{
+ struct realtek_ictl_output *output = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int cpu = smp_processor_id();
- struct irq_domain *domain;
unsigned long pending;
- unsigned int soc_int;
+ unsigned int hw_irq;
chained_irq_enter(chip, desc);
pending = readl(REG(cpu, RTL_ICTL_GIMR)) & readl(REG(cpu, RTL_ICTL_GISR));
@@ -139,9 +143,8 @@ static void realtek_irq_dispatch(struct irq_desc *desc)
goto out;
}
- domain = irq_desc_get_handler_data(desc);
- for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS)
- generic_handle_domain_irq(domain, soc_int);
+ for_each_set_bit(hw_irq, &pending, RTL_ICTL_NUM_INPUTS)
+ generic_handle_domain_irq(output->domain, hw_irq);
out:
chained_irq_exit(chip, desc);
@@ -149,10 +152,15 @@ out:
static int __init realtek_setup_parents(struct device_node *node)
{
- int parent_irq, num_parents = of_irq_count(node);
+ int err, parent_irq, num_parents = of_irq_count(node);
+ struct realtek_ictl_output *output;
struct of_phandle_args oirq;
struct irq_domain *domain;
+ output = kcalloc(1, sizeof(*output), GFP_KERNEL);
+ if (!output)
+ return -ENOMEM;
+
if (WARN_ON(!num_parents)) {
/*
* If DT contains no parent interrupts, assume MIPS IRQ 2 (HW0) is
@@ -160,8 +168,10 @@ static int __init realtek_setup_parents(struct device_node *node)
*/
oirq.np = of_find_compatible_node(NULL, NULL,
"mti,cpu-interrupt-controller");
- if (!oirq.np)
- return -EINVAL;
+ if (!oirq.np) {
+ err = -EINVAL;
+ goto err_out;
+ }
oirq.args_count = 1;
oirq.args[0] = 2;
@@ -171,17 +181,27 @@ static int __init realtek_setup_parents(struct device_node *node)
parent_irq = of_irq_get(node, 0);
}
- if (parent_irq <= 0)
- return parent_irq ? parent_irq : -ENODEV;
+ if (parent_irq <= 0) {
+ err = parent_irq ? parent_irq : -ENODEV;
+ goto err_out;
+ }
domain = irq_domain_create_linear(of_fwnode_handle(node), RTL_ICTL_NUM_INPUTS,
- &irq_domain_ops, NULL);
- if (!domain)
- return -ENOMEM;
+ &irq_domain_ops, output);
+ if (!domain) {
+ err = -ENOMEM;
+ goto err_out;
+ }
- irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, domain);
+ output->domain = domain;
+ irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, output);
return 0;
+
+err_out:
+ kfree(output);
+
+ return err;
}
static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
next prev parent reply other threads:[~2026-06-29 15:19 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-05 21:16 [PATCH 0/7] irqchip/irq-realtek-rtl: Add multi parent support Markus Stockhausen
2026-06-05 21:16 ` [PATCH 1/7] dt-bindings: interrupt-controller: realtek,rtl-intc: Allow 2 interrupt cells Markus Stockhausen
2026-06-10 19:59 ` Rob Herring (Arm)
2026-06-29 15:19 ` [tip: irq/drivers] " tip-bot2 for Markus Stockhausen
2026-06-05 21:16 ` [PATCH 2/7] irqchip/irq-realtek-rtl: Use helper for parent setup Markus Stockhausen
2026-06-29 15:19 ` [tip: irq/drivers] irqchip/irq-realtek-rtl: Split out parent setup code tip-bot2 for Markus Stockhausen
2026-06-05 21:16 ` [PATCH 3/7] irqchip/irq-realtek-rtl: Add interrupt data structure Markus Stockhausen
2026-06-29 15:19 ` tip-bot2 for Markus Stockhausen [this message]
2026-06-05 21:16 ` [PATCH 4/7] irqchip/irq-realtek-rtl: Add mask for interrupt handling Markus Stockhausen
2026-06-29 15:12 ` Thomas Gleixner
2026-06-29 15:43 ` AW: " Markus Stockhausen
2026-06-29 15:19 ` [tip: irq/drivers] " tip-bot2 for Markus Stockhausen
2026-06-05 21:16 ` [PATCH 5/7] irqchip/irq-realtek-rtl: Add a select function Markus Stockhausen
2026-06-29 15:19 ` [tip: irq/drivers] " tip-bot2 for Markus Stockhausen
2026-06-05 21:16 ` [PATCH 6/7] irqchip/irq-realtek-rtl: Allow shuffled interrupt order Markus Stockhausen
2026-06-29 15:19 ` [tip: irq/drivers] " tip-bot2 for Markus Stockhausen
2026-06-05 21:16 ` [PATCH 7/7] irqchip/irq-realtek-rtl: Activate multiple parents Markus Stockhausen
2026-06-29 15:19 ` [tip: irq/drivers] " tip-bot2 for Markus Stockhausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=178274639167.3843924.17339598138811147227.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=markus.stockhausen@gmx.de \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®