Re: [PATCH v5 3/3] drm/bridge: ti-sn65dsi83: Add reversed lvds lanes support

[Luca Ceresoli <luca.ceresoli@bootlin.com>]

On Fri, 17 Jul 2026 13:50:01 +0200, Wojciech Dubowik <wojciech.dubowik@mt.com> wrote:

Hello,

>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> index f8a786953526..df44df2e872a 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -845,6 +863,19 @@ static int sn65dsi83_parse_lvds_endpoint(struct sn65dsi83 *ctx, int channel)
>  	else
>  		return -EINVAL;
>  
> +	ret_data = of_property_read_u32_array(endpoint, "data-lanes", data_lanes,
> +			ARRAY_SIZE(data_lanes));
> +	if (!ret_data) {
> +		if (memcmp(data_lanes,
> +				supported_data_lane_mapping[LANE_MAPPING_REVERSE],
> +				ARRAY_SIZE(data_lanes)) == 0)

Did you have a look at this sashiko report? It seems valid:
 | sashiko-bot@kernel.org <sashiko-bot@kernel.org>:
 |
 | [Severity: Medium]
 | Does this code compare the entire array? memcmp() expects the length in
 | bytes, but ARRAY_SIZE(data_lanes) evaluates to 4 (the number of elements).
 |
 | Because data_lanes is an array of u32, checking only 4 bytes means only
 | the first element is compared. Should this be using sizeof(data_lanes)
 | instead?
 |
 | via: https://patch.msgid.link/20260717115630.C58A61F000E9@smtp.kernel.org

> +			ctx->lvds_reverse_lanes_conf[channel] = true;
> +		else if (memcmp(data_lanes,
> +			   supported_data_lane_mapping[LANE_MAPPING_NORMAL],
> +			   ARRAY_SIZE(data_lanes)) != 0)

Same here.

Otherwise looks good.

Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com