From: netdev-bot+sashiko@kernel.org
To: javen_xu@realsil.com.cn
Cc: hkallweit1@gmail.com, nic_swsd@realtek.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com,
maxime.chevallier@bootlin.com, horms@kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
daniel@makrotopia.org, linux@armlinux.org.uk,
enelsonmoore@gmail.com, daniel@thingy.jp
Subject: Re: [PATCH net-next v9 6/7] r8169: add ltr support for RTL8117 series
Date: Fri, 04 Sep 2026 22:25:22 +0000 [thread overview]
Message-ID: <178856072250.219967.7821276831481477544@kernel.org> (raw)
In-Reply-To: <20260831053745.1197-7-javen_xu@realsil.com.cn>
Thank you for your contribution! Sashiko AI review found 2 potential
issue(s) to consider:
Critical: 0 · High: 0 · Medium: 2 · Low: 0
- [Medium] Undisclosed scope creep in rtl_enable_ltr(): the newly added
`r8168_mac_ocp_modify(tp, SEND_LTR_MSG, 0x0000, LTR_MSG_EN)` (MAC-OCP…
- [Medium] The patch splits RTL_GIGA_MAC_VER_52 out of the VER_46..48
branch of rtl_enable_ltr() into its own case (r8169_main.c:3199-3214)…
--
r8169: add ltr support for RTL8117 series
This adds a dedicated LTR programming sequence for RTL_GIGA_MAC_VER_52 in
rtl_enable_ltr(), adds VER_52 to the L1.2 enable/disable version lists in
rtl_hw_aspm_clkreq_enable(), and sets a new MAC OCP bit (0xe038 BIT(0)) at
the end of rtl_enable_ltr().
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index eecde26d9de2c..5dbbc3a48c09a 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -353,11 +353,13 @@ enum rtl_registers {
> ALDPS_LTR = 0xe0a2,
> LTR_OBFF_LOCK = 0xe032,
> LTR_SNOOP = 0xe034,
> + SEND_LTR_MSG = 0xe038,
>
> #define ALDPS_LTR_EN BIT(0)
> #define LTR_OBFF_LOCK_EN BIT(0)
> #define LINK_SPEED_CHANGE_EN BIT(14)
> #define LTR_SNOOP_EN GENMASK(15, 14)
> +#define LTR_MSG_EN BIT(0)
> };
>
> enum rtl8168_8101_registers {
[ ... ]
> @@ -3194,8 +3196,23 @@ static void rtl_enable_ltr(struct rtl8169_private *tp)
> r8168_mac_ocp_write(tp, 0xcdf2, 0x9003);
> r8168_mac_ocp_modify(tp, LTR_OBFF_LOCK, 0x0000, LINK_SPEED_CHANGE_EN);
> break;
> - case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_48:
> case RTL_GIGA_MAC_VER_52:
> + r8168_mac_ocp_write(tp, 0xcdd0, 0x9003);
> + r8168_mac_ocp_modify(tp, LTR_SNOOP, 0x0000, LTR_SNOOP_EN);
> + r8168_mac_ocp_write(tp, 0xe02c, 0x1880);
> + r8168_mac_ocp_write(tp, 0xe02e, 0x4880);
> + r8168_mac_ocp_modify(tp, ALDPS_LTR, 0x0000, ALDPS_LTR_EN);
> + r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
> + r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
> + r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
> + r8168_mac_ocp_write(tp, 0xcdd2, 0x883c);
> + r8168_mac_ocp_write(tp, 0xcdd4, 0x8c12);
> + r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
> + r8168_mac_ocp_write(tp, 0xe0a6, 0x9003);
> + r8168_mac_ocp_write(tp, 0xe0a8, 0x9003);
> + r8168_mac_ocp_modify(tp, LTR_OBFF_LOCK, 0x0000, LINK_SPEED_CHANGE_EN);
> + break;
> + case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_48:
> r8168_mac_ocp_modify(tp, ALDPS_LTR, 0x0000, ALDPS_LTR_EN);
> RTL_W8(tp, COMBO_LTR_EXTEND, RTL_R8(tp, COMBO_LTR_EXTEND) | COMBO_LTR_EXTEND_EN);
> fallthrough;
[Severity: Medium]
Splitting RTL_GIGA_MAC_VER_52 out of the VER_46..48 arm drops this write for
every VER_52 device:
RTL_W8(tp, COMBO_LTR_EXTEND, RTL_R8(tp, COMBO_LTR_EXTEND) | COMBO_LTR_EXTEND_EN);
The changelog justifies the removal with "this bit is not required for
RTL8116af", but is RTL_GIGA_MAC_VER_52 equivalent to RTL8116af?
rtl_chip_infos maps both XIDs to the same mac_version:
{ 0x7cf, 0x54b, RTL_GIGA_MAC_VER_52, "RTL8168fp/RTL8117" },
{ 0x7cf, 0x54a, RTL_GIGA_MAC_VER_52, "RTL8168fp/RTL8117",
FIRMWARE_8168FP_3 },
and the af variant is only distinguished at runtime:
static bool rtl_is_8116af(struct rtl8169_private *tp)
{
return tp->mac_version == RTL_GIGA_MAC_VER_52 &&
(r8168_mac_ocp_read(tp, RTL_PKG_DETECT) & RTL_PKG_DETECT_MASK) ==
RTL_PKG_DETECT_8116AF && ...
So plain RTL8117/RTL8168fp cards that have had the COMBO_LTR_EXTEND_EN write
since LTR support was added now lose it. Should the removal be gated with
rtl_is_8116af(), or should the changelog state that the bit is not needed on
any RTL8117 and explain the behaviour change for existing hardware?
The following patch in the series, "r8169: fix RTL8116af can not enter
s0idle and c10", does not touch rtl_enable_ltr(), so this stands at the end
of the series.
> @@ -3215,6 +3232,7 @@ static void rtl_enable_ltr(struct rtl8169_private *tp)
> }
> /* chip can trigger LTR */
> r8168_mac_ocp_modify(tp, LTR_OBFF_LOCK, 0x0003, LTR_OBFF_LOCK_EN);
> + r8168_mac_ocp_modify(tp, SEND_LTR_MSG, 0x0000, LTR_MSG_EN);
> }
[Severity: Medium]
Was this write meant to be limited to the new RTL_GIGA_MAC_VER_52 arm?
It sits in the shared epilogue after the switch in rtl_enable_ltr(), and
every non-default case ends in break (or falls through into VER_51), so it is
also executed for VER_46..48, VER_51, VER_61..66, VER_70 and VER_80 by way of
rtl_hw_aspm_clkreq_enable()->rtl_enable_ltr() on any chip >= VER_32 with
tp->aspm_manageable.
SEND_LTR_MSG (0xe038) and LTR_MSG_EN are introduced here and appear nowhere
else under drivers/net/ethernet/realtek/, so there is no in-tree precedent
for this bit on the 8168h/8168ep or 8125/8126/8127 generations, whose LTR
value tables in the same function are entirely different.
VER_51 in particular now gets LTR message generation enabled while it is
absent from both mac_version lists in rtl_hw_aspm_clkreq_enable(), so it
never receives the matching "chip can trigger L1.2" programming.
The rest of the patch is carefully version gated (a dedicated
case RTL_GIGA_MAC_VER_52 is split out, and VER_52 is added to both lists in
rtl_hw_aspm_clkreq_enable()). Could this write be moved into the
case RTL_GIGA_MAC_VER_52 block, or gated by an explicit version list, or the
changelog extended to cover the wider hardware change it makes?
> @@ -3248,6 +3266,7 @@ static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
> rtl_enable_ltr(tp);
> switch (tp->mac_version) {
> case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_48:
> + case RTL_GIGA_MAC_VER_52:
> case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_LAST:
> /* reset ephy tx/rx disable timer */
> r8168_mac_ocp_modify(tp, 0xe094, 0xff00, 0);
> @@ -3260,6 +3279,7 @@ static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
> } else {
> switch (tp->mac_version) {
> case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_48:
> + case RTL_GIGA_MAC_VER_52:
> case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_LAST:
> r8168_mac_ocp_modify(tp, 0xe092, 0x00ff, 0);
> break;
Related to the SEND_LTR_MSG question above: this disable path clears only
0xe092 and never LTR_MSG_EN, so once ASPM has been enabled once the new bit
stays set on all affected chips. Is that intended?
--
Sashiko AI review · https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260831053745.1197-1-javen_xu%40realsil.com.cn
next prev parent reply other threads:[~2026-09-04 22:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-31 5:37 [PATCH net-next v9 0/7] r8169: add support for phylink javen
2026-08-31 5:37 ` [PATCH net-next v9 1/7] r8169: add speed in private struct javen
2026-09-04 22:25 ` netdev-bot+sashiko
2026-08-31 5:37 ` [PATCH net-next v9 2/7] net: phy: phylink: add helper to modify pause javen
2026-09-04 22:25 ` netdev-bot+sashiko
2026-08-31 5:37 ` [PATCH net-next v9 3/7] r8169: add support for phylink javen
2026-09-02 14:31 ` Andrew Lunn
2026-09-04 22:25 ` netdev-bot+sashiko
2026-08-31 5:37 ` [PATCH net-next v9 4/7] r8169: add support for RTL8116af javen
2026-09-02 14:38 ` Andrew Lunn
2026-09-04 22:25 ` netdev-bot+sashiko
2026-08-31 5:37 ` [PATCH net-next v9 5/7] r8169: add support for RTL8127atf javen
2026-09-02 14:41 ` Andrew Lunn
2026-09-04 22:25 ` netdev-bot+sashiko
2026-08-31 5:37 ` [PATCH net-next v9 6/7] r8169: add ltr support for RTL8117 series javen
2026-09-02 14:42 ` Andrew Lunn
2026-09-04 22:25 ` netdev-bot+sashiko [this message]
2026-08-31 5:37 ` [PATCH net-next v9 7/7] r8169: fix RTL8116af can not enter s0idle and c10 javen
2026-09-02 14:42 ` Andrew Lunn
2026-09-04 22:25 ` netdev-bot+sashiko
2026-09-02 14:28 ` [PATCH net-next v9 0/7] r8169: add support for phylink Andrew Lunn
2026-09-04 21:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=178856072250.219967.7821276831481477544@kernel.org \
--to=netdev-bot+sashiko@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=daniel@makrotopia.org \
--cc=daniel@thingy.jp \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=enelsonmoore@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=javen_xu@realsil.com.cn \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®