Re: [PATCH net] net: phy: dp83867: handle the active-high LED polarity mode

[patchwork-bot+netdevbpf@kernel.org]

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Thu,  3 Sep 2026 11:28:38 +0900 you wrote:
> Commit a274465cc3be ("net: phy: support 'active-high' property for PHY
> LEDs") added PHY_LED_ACTIVE_HIGH and made of_phy_led() set the matching
> bit in the modes mask when a LED node carries the 'active-high'
> property. dp83867 was not part of that series.
> 
> dp83867_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
> PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
> of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
> so far and passes it on, and phy_probe() fails. A device tree marking a
> DP83867 LED as 'active-high', which leds/common.yaml allows and
> ethernet-phy.yaml references for led@N nodes, thus stops the PHY from
> probing.
> 
> [...]

Here is the summary with links:
  - [net] net: phy: dp83867: handle the active-high LED polarity mode
    https://git.kernel.org/netdev/net/c/36a45facedd5

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html