Re: [PATCH net v3 0/3] net: phy: handle the active-high LED polarity mode

[patchwork-bot+netdevbpf@kernel.org]

Hello:

This series was applied to netdev/net.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Tue,  8 Sep 2026 19:59:56 +0900 you wrote:
> Commit a274465cc3be ("net: phy: support 'active-high' property for PHY
> LEDs") let a device tree LED node request PHY_LED_ACTIVE_HIGH, but a
> ->led_polarity_set() that only handles PHY_LED_ACTIVE_LOW returns -EINVAL
> for it. of_phy_leds() propagates that, phy_probe() fails, the mdio device
> is left unbound, and phy_attach_direct() falls back to the genphy driver,
> so the PHY loses its driver-specific configuration. Three in-tree drivers
> still have that gap; each already programs active high as its default, so
> the fix is one case label per driver.
> 
> [...]

Here is the summary with links:
  - [net,v3,1/3] net: phy: dp83867: handle the active-high LED polarity mode
    https://git.kernel.org/netdev/net/c/36a45facedd5
  - [net,v3,2/3] net: phy: dp83td510: handle the active-high LED polarity mode
    (no matching commit)
  - [net,v3,3/3] net: phy: qca808x: handle the active-high LED polarity mode
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html