mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: netdev-bot+sashiko@kernel.org
To: srinivas.neeli@amd.com
Cc: nagadheeraj.rottela@amd.com, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, richardcochran@gmail.com,
	michal.simek@amd.com, bigeasy@linutronix.de,
	clrkwllms@kernel.org, rostedt@goodmis.org,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rt-devel@lists.linux.dev, neelisrinivas18@gmail.com,
	git@amd.com
Subject: Re: [PATCH net-next v2 2/8] net: xilinx: tsn: add TSN endpoint wrapper driver
Date: Sat, 12 Sep 2026 20:36:06 +0000	[thread overview]
Message-ID: <178924536666.3125.1102910032368474240@kernel.org> (raw)
In-Reply-To: <20260909-patches_v2_external-v2-2-3a40babaff4c@amd.com>

Thank you for your contribution! Sashiko AI review found 2 potential
issue(s) to consider:

Critical: 0 · High: 0 · Medium: 0 · Low: 2

- [Low] Kconfig help text for CONFIG_XILINX_TSN claims the option
  "provides the wrapper device and the endpoint MAC that connects the IP…
- [Low] The binding Documentation/devicetree/bindings/net/xlnx,tsn-
  endpoint-ethernet-mac.yaml puts 'xlnx,num-priorities' (uint32, 2..8)…

--

net: xilinx: tsn: add TSN endpoint wrapper driver

This adds a thin wrapper platform driver for the AMD/Xilinx TSN Endpoint
Ethernet MAC IP node. The wrapper enables the six IP-wide clocks
described in the device tree and then populates the DT sub-nodes so each
one can bind to its own driver.

A couple of questions on the new Kconfig text and on the DT properties
the wrapper consumes.

[ ... ]

> diff --git a/drivers/net/ethernet/xilinx/tsn/Kconfig b/drivers/net/ethernet/xilinx/tsn/Kconfig
> new file mode 100644
> index 000000000000..b8939d8a92ef
> --- /dev/null
> +++ b/drivers/net/ethernet/xilinx/tsn/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Xilinx TSN device configuration
> +#
> +
> +config XILINX_TSN
> +	tristate "Xilinx TSN Ethernet driver"
> +	depends on OF_ADDRESS
> +	help
> +	  This driver supports the AMD/Xilinx Time-Sensitive Networking
> +	  (TSN) Endpoint Ethernet MAC IP. It provides the wrapper device
> +	  and the endpoint MAC that connects the IP to the host CPU. The
> +	  three-port switch is supported by the companion DSA driver.

[Severity: Low]
Is the help text accurate at this point in the series?  It says the
option "provides the wrapper device and the endpoint MAC that connects
the IP to the host CPU", but the Makefile added by this patch builds only
the wrapper object:

  xilinx_tsn-y := xilinx_tsn_main.o

and tsn_drivers[] registers only &tsn_driver, which matches
"xlnx,tsn-endpoint-ethernet-mac-3.0".  No driver in the tree matches the
sub-node compatibles at this commit, so devm_of_platform_populate() in
tsn_ip_probe() creates child platform devices that cannot bind, and
enabling the symbol here yields enabled clocks but no netdev.

The endpoint MAC part is resolved by later patches in this same series:
by the end of the series the Makefile also builds xilinx_tsn_ep.o,
tsn_drivers[] gains &xlnx_tsn_ep_driver, and xilinx_tsn_ep.c matches
".compatible = \"xlnx,tsn-ep-mac\"", so this is only a transient
mismatch between patches.

The remaining sentence about the "companion DSA driver" refers to
something that is not in-tree at any point of this series.  Could that
sentence be dropped or reworded until the DSA driver lands?

> +
> +	  If unsure, say N.
> diff --git a/drivers/net/ethernet/xilinx/tsn/Makefile b/drivers/net/ethernet/xilinx/tsn/Makefile
> new file mode 100644
> index 000000000000..6f99226f3dc8
> --- /dev/null
> +++ b/drivers/net/ethernet/xilinx/tsn/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_XILINX_TSN) += xilinx_tsn.o
> +xilinx_tsn-y := xilinx_tsn_main.o
> diff --git a/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_main.c b/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_main.c
> new file mode 100644
> index 000000000000..afe7609c67fb
> --- /dev/null
> +++ b/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_main.c
> @@ -0,0 +1,104 @@

[ ... ]

> +static int tsn_ip_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct xlnx_tsn_ip *w;
> +	int ret;
> +
> +	w = devm_kzalloc(dev, sizeof(*w), GFP_KERNEL);
> +	if (!w)
> +		return -ENOMEM;
> +
> +	for (int i = 0; i < TSN_NUM_CLOCKS; i++)
> +		w->clks[i].id = tsn_clk_names[i];
> +
> +	ret = devm_clk_bulk_get(dev, TSN_NUM_CLOCKS, w->clks);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get clocks\n");
> +
> +	ret = clk_bulk_prepare_enable(TSN_NUM_CLOCKS, w->clks);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to enable clocks\n");
> +
> +	ret = devm_add_action_or_reset(dev, tsn_clk_bulk_disable, w);
> +	if (ret)
> +		return ret;
> +
> +	return devm_of_platform_populate(dev);
> +}

[Severity: Low]
The binding
Documentation/devicetree/bindings/net/xlnx,tsn-endpoint-ethernet-mac.yaml
lists xlnx,num-priorities (uint32, 2..8) in the required: list for the
"xlnx,tsn-endpoint-ethernet-mac-3.0" node:

  xlnx,num-priorities:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 2
    maximum: 8

tsn_ip_probe() is the only driver matching that compatible here, and it
does devm_kzalloc(), devm_clk_bulk_get(), clk_bulk_prepare_enable(),
devm_add_action_or_reset() and devm_of_platform_populate() without any
of_property_read_u32(), so the mandatory property is neither read nor
range-checked.

A later patch in this series ("net: xilinx: tsn: parse endpoint DMA
channel configuration") does consume it from the parent IP node in
xlnx_tsn_ep_probe():

  ret = of_property_read_u32(ip_np, "xlnx,num-priorities", &num_prio);
  ...
  if (num_tx != num_prio)
          return dev_err_probe(dev, -EINVAL, ...);

so the binding/driver mismatch only exists between patches of this
series.  Was leaving the property unconsumed by the wrapper itself
intentional?

> +
> +static const struct of_device_id tsn_of_match[] = {
> +	{ .compatible = "xlnx,tsn-endpoint-ethernet-mac-3.0" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, tsn_of_match);

[ ... ]

-- 
Sashiko AI review · https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260909-patches_v2_external-v2-0-3a40babaff4c%40amd.com

  reply	other threads:[~2026-09-12 20:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-08 19:19 [PATCH net-next v2 0/8] Add Xilinx TSN Endpoint Ethernet MAC driver Srinivas Neeli
2026-09-08 19:19 ` [PATCH net-next v2 1/8] dt-bindings: net: add Xilinx TSN Endpoint Ethernet MAC Srinivas Neeli
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 2/8] net: xilinx: tsn: add TSN endpoint wrapper driver Srinivas Neeli
2026-09-12 20:36   ` netdev-bot+sashiko [this message]
2026-09-08 19:19 ` [PATCH net-next v2 3/8] net: xilinx: tsn: add endpoint MAC driver skeleton Srinivas Neeli
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 4/8] net: xilinx: tsn: parse endpoint DMA channel configuration Srinivas Neeli
2026-09-09 19:21   ` sashiko-bot
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 5/8] net: xilinx: tsn: bring up the endpoint MCDMA channels Srinivas Neeli
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 6/8] net: xilinx: tsn: add the endpoint RX data path Srinivas Neeli
2026-09-09 19:21   ` sashiko-bot
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 7/8] net: xilinx: tsn: add the endpoint TX " Srinivas Neeli
2026-09-09 19:21   ` sashiko-bot
2026-09-12 20:36   ` netdev-bot+sashiko
2026-09-08 19:19 ` [PATCH net-next v2 8/8] net: xilinx: tsn: deliver endpoint RX frames to DSA user ports Srinivas Neeli
2026-09-12 20:36   ` netdev-bot+sashiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=178924536666.3125.1102910032368474240@kernel.org \
    --to=netdev-bot+sashiko@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=bigeasy@linutronix.de \
    --cc=clrkwllms@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=git@amd.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-devel@lists.linux.dev \
    --cc=michal.simek@amd.com \
    --cc=nagadheeraj.rottela@amd.com \
    --cc=neelisrinivas18@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=srinivas.neeli@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®