Re: [PATCH net-next 3/4] dt-bindings: net: allwinner,sun8i-a83t-emac: Add Allwinner H616 EMAC1 and syscon index

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 16 Sep 2026 14:41:18 +1000, Alastair D'Silva wrote:
> Document the Allwinner H616 EMAC1 and internal EMAC compatible strings
> ("allwinner,sun50i-h616-emac1" and "allwinner,sun50i-h616-internal-emac").
> Update the syscon property schema to support an optional register index
> offset argument, allowing boards to reference the secondary EMAC clock
> register on H616/H618 SoCs.
> 
> Assisted-by: LLM
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
> 
> Notes:
>     Tested against Allwinner H616/H618 device trees in Armbian, verifying
>     schema validation with dt_binding_check.
> 
>  .../bindings/net/allwinner,sun8i-a83t-emac.yaml    | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml: properties:syscon:items:0: {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'Phandle to the device containing the EMAC or GMAC clock register'}, {'description': 'Register index offset (0 for EMAC0, 1 for EMAC1)'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260916044119.475666-4-alastair@d-silva.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.