Re: [PATCH v6 07/15] dt-bindings: display: add a boot logo node under /chosen

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 27 Oct 2026 14:53:34 +0100, Màxim Pedraza Padilla wrote:
> Products built on the same board often differ only in branding. On UEFI
> systems the firmware hands the operating system its boot logo through
> the ACPI BGRT; a device tree system has no such table, so today the logo
> is built into the kernel, and each product needs its own kernel image.
> With U-Boot's Falcon mode the device tree is the only thing that reaches
> the kernel, so it is also the only place the logo can come from.
> 
> Add a "logo" node, compatible "boot-logo", under /chosen. It lives
> there because a logo is configuration handed over by firmware rather
> than a description of the hardware, as simple-framebuffer nodes already
> are.
> 
> The image is a BMP with 24 bits per pixel and no compression, the
> format of the BGRT image, so that one file serves the firmware splash,
> a BMP loaded as firmware and this node alike. It is carried either in
> a "logo-image" property, which dtc fills in from the file with /incbin/,
> or in a reserved memory region the bootloader loaded it into, named by
> "memory-region". Exactly one of the two must be present.
> 
> "logo-position" takes -1 on an axis to mean centre on that axis, which
> is the only way to say it when the device tree does not know the image
> size, and "logo-offset" is added afterwards. "rotation" is the one of
> panel-common.yaml, degrees counter clockwise, but turns the image rather
> than the screen, so position and offset stay in screen pixels. The
> optional "background-color" goes with the image, since a logo designed
> for one background looks wrong on another.
> 
> Assisted-by: Claude:claude-opus-5-5
> Signed-off-by: Màxim Pedraza Padilla <maximpedraza@gmail.com>
> ---
>  .../bindings/display/boot-logo.yaml           | 156 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 157 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/boot-logo.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/boot-logo.example.dtb: chosen: 'logo' does not match any of the regexes: '^framebuffer', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/chosen.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20261027135342.2003632-8-maximpedraza@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.