From: "John Stoffel" <john@stoffel.org>
To: "John Stoffel" <john@stoffel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Sergei Shtylyov <sshtylyov@ru.mvista.com>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: 2.6.21-rc6-mm1 ATA HPT37x regression
Date: Wed, 18 Apr 2007 21:34:22 -0400 [thread overview]
Message-ID: <17958.50974.973764.356099@smtp.charter.net> (raw)
In-Reply-To: <17957.8073.587946.969040@smtp.charter.net>
>>>>> "John" == John Stoffel <john@stoffel.org> writes:
>>> > Ok, so do I need to do anything special with the next -mm release and
>>> > the next version?
>>>
>>> Well, let Alan decide that (2Alan: and I said that HPT code is bogus :-).
Alan> Try drivers/ide/pci/hpt366 - if that works grab a dmesg and let
Alan> me know. It means that Sergei's DPLL sync code seems to work
Alan> better than the vendor code and its time to swap it over.
John> Ok, I'll give that a whirl under 2.6.21-rc7 tonight. I'll build them
John> in modular so I can switch around more easily. I hope. :]
Ok, here's the dmesg output using the hpt366 old IDE driver,
2.6.21-rc7, SMP:
[ 160.926355] HPT302: IDE controller at PCI slot 0000:03:06.0
[ 160.928030] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 18 (level, low) -> IRQ
18
[ 160.931212] HPT302: chipset revision 1
[ 160.932801] HPT302: DPLL base: 66 MHz, f_CNT: 100, assuming 33 MHz PCI
[ 160.941157] HPT302: using 66 MHz DPLL clock
[ 160.942646] HPT302: 100% native mode on irq 18
[ 160.943918] ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:pi
o
[ 160.946636] ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:DMA, hdh:pi
o
[ 160.949439] Probing IDE interface ide2...
[ 161.213560] hde: WDC WD1200JB-00CRA1, ATA DISK drive
[ 161.828020] ide2 at 0xecf8-0xecff,0xecf2 on irq 18
[ 161.829616] Probing IDE interface ide3...
[ 162.094086] hdg: WDC WD1200JB-00EVA0, ATA DISK drive
[ 162.709002] ide3 at 0xece0-0xece7,0xecda on irq 18
Which looks ok to me I guess. It found my MD disks on there and
assmebled them, eventually. *grin*
I'll reboot and send out the corresponding ATA HPT37x driver dmesg...
John
next prev parent reply other threads:[~2007-04-19 1:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-17 2:36 John Stoffel
2007-04-17 14:08 ` Sergei Shtylyov
2007-04-17 16:30 ` John Stoffel
2007-04-17 17:06 ` Sergei Shtylyov
2007-04-17 17:13 ` Alan Cox
2007-04-17 19:27 ` John Stoffel
2007-04-17 19:37 ` Sergei Shtylyov
2007-04-17 20:03 ` Mark Lord
2007-04-19 1:34 ` John Stoffel [this message]
2007-04-19 1:49 ` John Stoffel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17958.50974.973764.356099@smtp.charter.net \
--to=john@stoffel.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®