Re: [PATCH 7/8] arm64: dts: s32g2: add memory nodes for evb and rdb2

["Andreas Färber" <afaerber@suse.de>]

Hi Chester et al.,

On 05.08.21 08:54, Chester Lin wrote:
> Add memory nodes for S32G-VNP-EVB and S32G-VNP-RDB2 since they have fixed
> RAM size.

You can drop "since they have fixed RAM size" - if they didn't, you
would simply choose the lowest size and rely on the bootloader (U-Boot)
to overwrite it with the actually detected size.

Please expand why this patch is separate - BSP based, I assume?

> 
> Signed-off-by: Chester Lin <clin@suse.com>
> ---
>  arch/arm64/boot/dts/freescale/s32g274a-evb.dts  | 8 ++++++++
>  arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts | 8 ++++++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> index a1ae5031730a..cd41f0af5dd8 100644
> --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>  /*
>   * Copyright (c) 2021 SUSE LLC
> + * Copyright 2019-2020 NXP

@NXP: Please review year, alignment. Do any Signed-off-bys apply?

>   */
>  
>  /dts-v1/;
> @@ -14,6 +15,13 @@ / {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* 4GB RAM */

This looks strange to me - either put /* 4 GiB RAM */ before the node,
three lines above, and/or append comment /* 2 GiB */ on each line below.
Note the space, and suggest to be precise about factor 1024 vs. 1000.

> +		reg = <0 0x80000000 0 0x80000000>,

Note that this gives you the range to use for the .dtsi /soc node:
Address 0x0 with size 0x80000000 gets mapped to 0x0 0x0, excluding the
upper 0x80000000 for the RAM here. Or address 0x0 0x0 for two /soc cells
if there are high-memory peripherals.

> +		      <8 0x80000000 0 0x80000000>;

Maybe use 0x8 here and 0x0 above? (second 0 stays same, so don't mind)

> +	};
>  };
>  
>  &uart0 {
> diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> index b2faae306b70..8fbbf3b45eb8 100644
> --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>  /*
>   * Copyright (c) 2021 SUSE LLC
> + * Copyright 2019-2020 NXP

@NXP: 2021?

>   */
>  
>  /dts-v1/;
> @@ -14,6 +15,13 @@ / {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* 4GB RAM */
> +		reg = <0 0x80000000 0 0x80000000>,
> +		      <8 0x80000000 0 0x80000000>;
> +	};

Same comments as for EVB.

>  };
>  
>  &uart0 {

Regards,
Andreas

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)