mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Deepak R Varma <drv@mailo.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org, drv@mailo.com
Subject: [PATCH v4 8/9] staging: media: atomisp: remove unnecessary pr_info calls
Date: Wed, 28 Apr 2021 23:40:26 +0530	[thread overview]
Message-ID: <17bd2c71457d25e584f7fdcc6246a3a8d3e4c959.1619630709.git.drv@mailo.com> (raw)
In-Reply-To: <cover.1619630709.git.drv@mailo.com>

pr_info() messages to log function entry / exit tracing spams the log.
Such basic tracing is not necessary and be removed.

Signed-off-by: Deepak R Varma <drv@mailo.com>
---

Changes since v3:
   - Patch introduced based on other patch review feedback
Changes since v2:
   - Patch not part of set
Changes since v1:
   - Patch not part of set



 .../staging/media/atomisp/i2c/atomisp-gc0310.c  | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
index bb75d077ad63..5f1929a49b07 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
@@ -718,7 +718,6 @@ static int gc0310_init(struct v4l2_subdev *sd)
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct gc0310_device *dev = to_gc0310_sensor(sd);
 
-	pr_info("%s S\n", __func__);
 	mutex_lock(&dev->input_lock);
 
 	/* set initial registers */
@@ -730,7 +729,6 @@ static int gc0310_init(struct v4l2_subdev *sd)
 
 	mutex_unlock(&dev->input_lock);
 
-	pr_info("%s E\n", __func__);
 	return ret;
 }
 
@@ -796,7 +794,6 @@ static int power_up(struct v4l2_subdev *sd)
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret;
 
-	pr_info("%s S\n", __func__);
 	if (!dev->platform_data) {
 		dev_err(&client->dev,
 			"no camera_sensor_platform_data");
@@ -823,7 +820,6 @@ static int power_up(struct v4l2_subdev *sd)
 
 	msleep(100);
 
-	pr_info("%s E\n", __func__);
 	return 0;
 
 fail_gpio:
@@ -959,15 +955,12 @@ static int startup(struct v4l2_subdev *sd)
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret = 0;
 
-	pr_info("%s S\n", __func__);
-
 	ret = gc0310_write_reg_array(client, gc0310_res[dev->fmt_idx].regs);
 	if (ret) {
 		dev_err(&client->dev, "gc0310 write register err.\n");
 		return ret;
 	}
 
-	pr_info("%s E\n", __func__);
 	return ret;
 }
 
@@ -982,8 +975,6 @@ static int gc0310_set_fmt(struct v4l2_subdev *sd,
 	int ret = 0;
 	int idx = 0;
 
-	pr_info("%s S\n", __func__);
-
 	if (format->pad)
 		return -EINVAL;
 
@@ -1035,7 +1026,6 @@ static int gc0310_set_fmt(struct v4l2_subdev *sd,
 		goto err;
 	}
 
-	pr_info("%s E\n", __func__);
 err:
 	mutex_unlock(&dev->input_lock);
 	return ret;
@@ -1068,7 +1058,6 @@ static int gc0310_detect(struct i2c_client *client)
 	int ret;
 	u16 id;
 
-	pr_info("%s S\n", __func__);
 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
 		return -ENODEV;
 
@@ -1095,8 +1084,6 @@ static int gc0310_detect(struct i2c_client *client)
 
 	dev_dbg(&client->dev, "detect gc0310 success\n");
 
-	pr_info("%s E\n", __func__);
-
 	return 0;
 }
 
@@ -1142,7 +1129,6 @@ static int gc0310_s_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	mutex_unlock(&dev->input_lock);
-	pr_info("%s E\n", __func__);
 	return ret;
 }
 
@@ -1153,7 +1139,6 @@ static int gc0310_s_config(struct v4l2_subdev *sd,
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret = 0;
 
-	pr_info("%s S\n", __func__);
 	if (!platform_data)
 		return -ENODEV;
 
@@ -1196,7 +1181,6 @@ static int gc0310_s_config(struct v4l2_subdev *sd,
 	}
 	mutex_unlock(&dev->input_lock);
 
-	pr_info("%s E\n", __func__);
 	return 0;
 
 fail_csi_cfg:
@@ -1365,7 +1349,6 @@ static int gc0310_probe(struct i2c_client *client)
 	if (ret)
 		gc0310_remove(client);
 
-	pr_info("%s E\n", __func__);
 	return ret;
 out_free:
 	v4l2_device_unregister_subdev(&dev->sd);
-- 
2.31.1




  parent reply	other threads:[~2021-04-28 18:10 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1619630709.git.drv@mailo.com>
2021-04-28 18:06 ` [PATCH v4 3/9] staging: media: atomisp: remove unnecessary braces Deepak R Varma
2021-04-28 18:07 ` [PATCH v4 4/9] staging: media: atomisp: use __func__ over function names Deepak R Varma
2021-05-17 13:44   ` Mauro Carvalho Chehab
2021-05-19 16:08     ` Deepak R Varma
2021-04-28 18:08 ` [PATCH v4 5/9] staging: media: atomisp: reformat code comment blocks Deepak R Varma
2021-04-29  7:06   ` Fabio Aiuto
2021-04-29 11:49     ` Deepak R Varma
2021-04-30 10:04       ` Hans Verkuil
2021-04-30 11:15         ` Deepak R Varma
2021-04-30 12:27           ` Deepak R Varma
2021-04-30 12:29             ` Hans Verkuil
2021-04-28 18:09 ` [PATCH v4 6/9] staging: media: atomisp: fix CamelCase variable naming Deepak R Varma
2021-04-28 18:09 ` [PATCH v4 7/9] staging: media: atomisp: replace raw pr_*() by dev_dbg() Deepak R Varma
2021-04-28 18:10 ` Deepak R Varma [this message]
2021-04-28 18:10 ` [PATCH v4 9/9] staging: media: atomisp: remove unwanted dev_*() calls Deepak R Varma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17bd2c71457d25e584f7fdcc6246a3a8d3e4c959.1619630709.git.drv@mailo.com \
    --to=drv@mailo.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®