From: Anders Widman <andewid@tnonline.net>
To: linux-kernel@vger.kernel.org
Subject: 2.4.x IDE: Statis=0x58 - Drive not ready for command
Date: Sat, 8 Mar 2003 17:54:47 +0100 [thread overview]
Message-ID: <18084636656.20030308175447@tnonline.net> (raw)
I get lots of errors like these:
kernel: PDC202XX: Secondary channel reset.
kernel: hdh: drive not ready for command
kernel: ide3: reset: success
kernel: hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest }
kernel: hdf: drive not ready for command
kernel: hdh: status error: status=0x58 { DriveReady SeekComplete DataRequest }
kernel: hdh: drive not ready for command
kernel: hdh: status timeout: status=0xd0 { Busy }
kernel: PDC202XX: Secondary channel reset.
kernel: hdh: drive not ready for command
kernel: ide3: reset: success
* Running virtually every kernel since 2.4.17-2.4-21-x.
* All harddrives UDMA100.
* Tried with DMA and unmask IRQ off.
* Tried with and without ACPI, APIC and APM.
* Happens to all harddrives.
* Cabling, power, hardware and drives thorowly checked and replaced
for testing.
* Tested with one VIA KT266a motherboard and two Intel 440BX
* SMART values good.
* To all my testing I have not found any problems with the hardware.
* When to many of these IDE error occur the system freezes.
* Errors occur with the internal controller as well as the two Promise
PDC20268 (U100 Tx2) controllers.
What should I do to fix this? I do not want to run Windows as I need
LVM to manage the diskspace. Windows does however run very stable.
Any tips or ideas are welcome!
Regards,
Anders
--------
PGP public key: https://tnonline.net/secure/pgp_key.txt
next reply other threads:[~2003-03-08 16:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-08 16:54 Anders Widman [this message]
[not found] ` <20030308183936.GA3282@vana.vc.cvut.cz>
2003-03-08 19:35 ` Anders Widman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18084636656.20030308175447@tnonline.net \
--to=andewid@tnonline.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®