From: Gabriel C <nix.or.die@googlemail.com>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Gabriel C <crazy@frugalware.org>,
Maxim Levitsky <maximlevitsky@gmail.com>,
Dan Williams <dan.j.williams@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
Andriy Gapon <avg@icyb.net.ua>
Subject: Re: [lm-sensors] Status/support for Linux HECI from Intel? (for temp/voltage monitoring)
Date: Mon, 4 Jan 2010 15:09:17 +0100 [thread overview]
Message-ID: <1820d69d1001040609j6c0b169w38694c33af3fa686@mail.gmail.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1001040851490.29475@p34.internal.lan>
2010/1/4 Justin Piszcz <jpiszcz@lucidpixels.com>:
>
>
> On Mon, 4 Jan 2010, Gabriel C wrote:
>
>> 2009/2/12 Justin Piszcz <jpiszcz@lucidpixels.com>:
>>>
>>>
>>> On Thu, 12 Feb 2009, Gabriel C wrote:
>>>
>>>> Maxim Levitsky wrote:
>>>>
>>>>> On Wed, 2009-01-07 at 11:42 -0500, Justin Piszcz wrote:
>>>>>>
>>>>>> On Wed, 7 Jan 2009, Dan Williams wrote:
>>>>>>
>>>>>>> Justin Piszcz wrote:
>>>>>>>>
>>>>>>>> The HECI interface would allow lm_sensors developers to grab the
>>>>>>>> temperatures off the chips on the board.
>>>>>>>>
>>>>>>>> From 2005(?)-2008 there was some chatter about supporting it but it
>>>>>>>> never
>>>>>>>> seemed to happen, is there any eventual planned support for
>>>>>>>> supporting
>>>>>>>> Intel's HECI interface or if the user wants to see the
>>>>>>>> temperatures/voltages just buy a different motherboard with an ITE
>>>>>>>> I/O
>>>>>>>> controller?
>>>>>>>>
>>>>>>>> I have a couple DG965WH boards and it would be nice to see the
>>>>>>>> temperature of the chipset etc without having to reboot into the
>>>>>>>> BIOS.
>>>>>>>>
>>>>>>> Hi Justin,
>>>>>>>
>>>>>>> I am not up to date on the progress in this area, but perhaps this
>>>>>>> site
>>>>>>> (http://www.openamt.org/) has what you are looking for?
>>>>>>>
>>>>>>> Regards,
>>>>>>> Dan
>>>>>>>
>>>>>> Yeah that is the site-- however, will it ever get merged? I have not
>>>>>> heard anything about it for a year or so.
>>>>>
>>>>> Nope, the heci is just a controller, but we need a way to tell that
>>>>> controller to show us the temperature data.
>>>>> But intel hasn't released the QST sdk, and probably never will.
>>>>>
>>>>> Sad,
>>>>
>>>>
>>>> Well I found this interesting thread about :
>>>>
>>>>
>>>>
>>>> http://software.intel.com/en-us/forums/manageability-software-development/topic/54851/
>>>>
>>>> It looks like the QST SDK already exists and is planned to be released..
>>>> (
>>>>
>>>> http://software.intel.com/en-us/forums/manageability-software-development/topic/54851/reply/74068/
>>>> )
>>>
>>> I volunteer to test any patches if/when they are created after the SDK is
>>> released.
>>>
>>
>>
>> Again me .. Well the SDK is *still* not released .. The Intel folks
>> said back in August :
>>
>> "The latest word is that the SDK is being prepared for approval but it
>> is contingent upon an upcoming platform release."
>>
>> ( whatever that means )
>>
>>
>> Anyway Andriy Gapon has posted on lm-sensors some nice tool to read
>> the sensors output ( thx :) )
>>
>> (http://lists.lm-sensors.org/pipermail/lm-sensors/2009-October/026830.html)
>>
>> Today I'm out from hospital so I've decided to quick hack this tool
>> and make it work on Linux.
>>
>> Here the output from my DQ45CB mobo:
>>
>> crazy@thor:~/INTEL/QST/Li$ sudo ./heci-qst
>> CPU Temp: 56.00 °C
>> MB Temp: 31.14 °C
>> ICH Temp: 67.37 °C
>> MCH Temp: 66.00 °C
>> CPU Fan: 1080 RPM
>> INL Fan: 1202 RPM
>> OUTL Fan: 288 RPM
>> +12 Volts: 11.965 V
>> +5 Volts: 5.021 V
>> +3.3 Volts: 3.316 V
>> MCH Vccp: 1.122 V
>> CPU1 Vccp: 1.125 V
>>
>> Justin I know is not based on released SDK of Intel but maybe you
>> still want to do some tests ?:)
>
> Hi,
>
> I upgraded my system and have a new board now, I do have another system that
> uses the same board (DG965WH) if you have a patch/URL with the software I
> can give it a run.
The file was attached ..
Just do:
gcc -o heci-qst heci-qst-linux.c
>
> Justin.
Gabriel
next prev parent reply other threads:[~2010-01-04 14:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-30 12:26 Justin Piszcz
2009-01-07 16:41 ` Dan Williams
2009-01-07 16:42 ` Justin Piszcz
2009-01-07 19:21 ` Maxim Levitsky
2009-02-12 1:35 ` [lm-sensors] " Gabriel C
2009-02-12 2:36 ` Joshua D Doll
2009-02-12 17:39 ` Justin Piszcz
2010-01-04 13:51 ` Gabriel C
2010-01-04 13:54 ` Justin Piszcz
2010-01-04 14:09 ` Gabriel C [this message]
2010-01-04 14:22 ` Justin Piszcz
2010-01-04 14:43 ` Gabriel C
2010-01-04 14:55 ` Justin Piszcz
2010-01-04 15:07 ` Gabriel C
2010-01-13 8:19 ` Andriy Gapon
2010-02-23 17:56 ` Gabriel C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1820d69d1001040609j6c0b169w38694c33af3fa686@mail.gmail.com \
--to=nix.or.die@googlemail.com \
--cc=avg@icyb.net.ua \
--cc=crazy@frugalware.org \
--cc=dan.j.williams@intel.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=maximlevitsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®