Re: [PATCH v2 1/5] brcmfmac: Drop all the RAW device IDs

[Arend Van Spriel <arend.vanspriel@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 1530 bytes --]

On February 2, 2023 6:25:28 AM "'Hector Martin' via BRCM80211-DEV-LIST,PDL" 
<brcm80211-dev-list.pdl@broadcom.com> wrote:

> On 31/01/2023 23.17, Jonas Gorski wrote:
>> On Tue, 31 Jan 2023 at 12:36, Hector Martin <marcan@marcan.st> wrote:
>>>
>>> These device IDs are only supposed to be visible internally, in devices
>>> without a proper OTP. They should never be seen in devices in the wild,
>>> so drop them to avoid confusion.
>>
>> I think these can still show up in embedded platforms where the
>> OTP/SPROM is provided on-flash.
>>
>> E.g. https://forum.archive.openwrt.org/viewtopic.php?id=55367&p=4
>> shows this bootlog on an BCM4709A0 router with two BCM43602 wifis:
>>
>> [    3.237132] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000
>> [    3.237174] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
>> [    3.237199] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
>> [    3.237302] pci 0000:01:00.0: supports D1 D2
>> ...
>> [    3.782384] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000
>> [    3.782440] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
>> [    3.782474] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
>> [    3.782649] pci 0001:03:00.0: supports D1 D2
>>
>> 0xaa52 == 43602 (BRCM_PCIE_43602_RAW_DEVICE_ID)
>>
>> Rafał can probably provide more info there.
>>
>> Regards
>> Jonas
>
> Arend, any comments on these platforms?

Huh? I already replied to that couple of days ago or did I only imagine 
doing that.

Regards,
Arend




[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4219 bytes --]