mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, soc@kernel.org
Subject: Re: [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers
Date: Fri, 20 Dec 2019 08:05:50 +0100	[thread overview]
Message-ID: <186ca73e408654981e08f7f12ae543ba51debb68.camel@v3.sk> (raw)
In-Reply-To: <20191220065314.237624-5-lkundrak@v3.sk>

On Fri, 2019-12-20 at 07:53 +0100, Lubomir Rintel wrote:
> There are two on MMP3, along with the PHYs. The PHYs are made compatible
> with the NOP transceiver, since there's no driver for the time being and
> they're likely configured by the firmware.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  arch/arm/boot/dts/mmp3.dtsi | 44 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
> index d9762de0ed34b..36c50706e60e0 100644
> --- a/arch/arm/boot/dts/mmp3.dtsi
> +++ b/arch/arm/boot/dts/mmp3.dtsi
> @@ -201,6 +201,50 @@ usb_otg0: usb-otg@d4208000 {
>  				status = "disabled";
>  			};
>  
> +			hsic_phy0: hsic-phy@f0001800 {
> +				compatible = "marvell,mmp3-hsic-phy",
> +					     "usb-nop-xceiv",

I managed to mess this up right before sending it out.     ^^^
Sorry for that. There should be a semicolon there. I'll fix this up on
next patch spin.

> +				reg = <0xf0001800 0x40>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			hsic0: hsic@f0001000 {
> +				compatible = "marvell,pxau2o-ehci";
> +				reg = <0xf0001000 0x200>;
> +				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
> +				clock-names = "USBCLK";
> +				phys = <&hsic_phy0>;
> +				phy-names = "usb";
> +				phy_type = "hsic";
> +				#address-cells = <0x01>;
> +				#size-cells = <0x00>;
> +				status = "disabled";
> +			};
> +
> +			hsic_phy1: hsic-phy@f0002800 {
> +				compatible = "marvell,mmp3-hsic-phy",
> +					     "usb-nop-xceiv",
> +				reg = <0xf0002800 0x40>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			hsic1: hsic@f0002000 {
> +				compatible = "marvell,pxau2o-ehci";
> +				reg = <0xf0002000 0x200>;
> +				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
> +				clock-names = "USBCLK";
> +				phys = <&hsic_phy1>;
> +				phy-names = "usb";
> +				phy_type = "hsic";
> +				#address-cells = <0x01>;
> +				#size-cells = <0x00>;
> +				status = "disabled";
> +			};
> +
>  			mmc1: mmc@d4280000 {
>  				compatible = "mrvl,pxav3-mmc";
>  				reg = <0xd4280000 0x120>;


  reply	other threads:[~2019-12-20  7:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-20  6:53 [PATCH 1/5] Enable HSIC on MMP3 SoC Lubomir Rintel
2019-12-20  6:53 ` [PATCH 1/5] dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks Lubomir Rintel
2019-12-23 19:32   ` Stephen Boyd
2019-12-20  6:53 ` [PATCH 2/5] clk: mmp2: Add " Lubomir Rintel
2019-12-23 19:33   ` Stephen Boyd
2019-12-20  6:53 ` [PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy Lubomir Rintel
2020-01-07 22:20   ` Rob Herring
2019-12-20  6:53 ` [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers Lubomir Rintel
2019-12-20  7:05   ` Lubomir Rintel [this message]
2020-01-06 19:22     ` Olof Johansson
2019-12-23  9:57   ` kbuild test robot
2019-12-20  6:53 ` [PATCH 5/5] ARM: dts: mmp3-dell-ariel: Enable the HSIC Lubomir Rintel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=186ca73e408654981e08f7f12ae543ba51debb68.camel@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®