From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263597AbTHOLcr (ORCPT ); Fri, 15 Aug 2003 07:32:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263637AbTHOLcr (ORCPT ); Fri, 15 Aug 2003 07:32:47 -0400 Received: from h000.c007.snv.cp.net ([209.228.33.228]:43430 "HELO c007.snv.cp.net") by vger.kernel.org with SMTP id S263597AbTHOLcq (ORCPT ); Fri, 15 Aug 2003 07:32:46 -0400 X-Sent: 15 Aug 2003 11:32:44 GMT Date: Fri, 15 Aug 2003 13:32:54 +0200 From: Uberto Barbini X-Mailer: The Bat! (v1.62i) Personal Reply-To: Uberto Barbini X-Priority: 3 (Normal) Message-ID: <188187847079.20030815133254@ubiland.net> To: linux-kernel@vger.kernel.org Subject: Mtrr problem on via M10000 with 2.6.0-test3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Every time, X (4.3.99.10) reports at starting: (WW) via(0): "Failed to setup write-combining range(0xe4000000,0x4000000) The same error appears with vesa driver too. I enabled mtrr in kernel and tried less /proc/mtrr ... reg03: base=0e40000000 (3648MB), size= 8MB: write-combining, count=1 The values seem right. I also tried to change the ram amount for the video card (8-64) on bios and it'll report correctly. The problem is present at least since 2.6.0-test1, and with all X versions. Some other informations: I'm using gentoo and loaded via_agp and agpgart, apart the error X runs nicely at first but after some time it freeze all (telnet not responding). Thanks for any hints or help. Uberto Barbini